Ambient Weather EZ-GWA Bruksanvisning


Läs gratis den bruksanvisning för Ambient Weather EZ-GWA (9 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om Ambient Weather EZ-GWA eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/9
Page 1
Ambient Weather
6845 W. Frye Road
Chandler, AZ 85226
TEL 480-346-3380 FAX 480-346-3381
www.AmbientWeather.com
EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast
EZ-125-SK Stake Kit (Optional)
EZ-46-3 Tar Pad Kit (Optional)
EZ-GWA Guy Wire Kit (Optional)
EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast
The EZ-48-3AB-125-35 Tripod assembly is
constructed of 18 gauge 1008-10 steel tubing,
galvanized using the Flo-Coat (zinc-chromate-
polymer) process for excellent corrosion protection.
Ungalvanized leg braces, mast collars, & connecting
components are gold irridited for corrosion
protection.
Mast collars feature a captive "stop-nut" design, to
eliminate lock nut spin when tightened; and a mast
supporting cup for additional stability. The tripod
base is 33" (85.8 cm).
Tripod height 33 inches (85.8 cm). Supplied with
one mast for an assembly height of 53" inches
(150.8 cm), and an adjustment range of 41 to 58
inches (106.6 to 150.8 cm).
Add up to two mast extensions to extend the height
of 31" per mast extension.
Add the optional stake kit for moderate wind ground
installation.
Add the optional tar pads for roof-top installations.
Add the optional guy wire kit for configurations
with two extension poles, or for locations that
experience sustained periods of high wind.
Figure 1
Components
The EZ-48-3AB-125-35 Tripod assembly includes the following components.
Page 2
Ambient Weather
6845 W. Frye Road
Chandler, AZ 85226
TEL 480-346-3380 FAX 480-346-3381
www.AmbientWeather.com
Mounting Tripod 33” x 33” x 33”
Mast (mounting pole)
36”
6 5/16” Bolts (already assembled to the Mounting Tripod)
Figure 2
Tools and Materials Needed
Adjustable Wrench
Level or Plumb
Drill
Important Installation Instructions
CAUTION: Improper installation of the
mounting tripod to your roof top may result in
leaks. We recommend a licensed roofing
specialist for evasive installations.
CAUTION: Any metal object may attract a
lightning strike, including your weather station
and tripod.
Never install your weather station in a
thunderstorm.
We recommend properly grounding the tripod to
avoid extensive damage to the weather station
and structure. Consult a licensed electrician or
local lightning detection expert prior to installing
a ground wire.
Tripod Installation
Unfold the tripod so the installed pads are
flat on the ground.
Figure 3
Reference . Insert the mounting Figure 3
pole into the center of the two collars.
Secure the mast by tightening the hex nuts
on the 5/15” bolts until the bolts hold the
mast in place securely. Make sure the mast
is level.
Page 3
Ambient Weather
6845 W. Frye Road
Chandler, AZ 85226
TEL 480-346-3380 FAX 480-346-3381
www.AmbientWeather.com
Galvanized 1-1/4 inch (3.25 cm) O.D., 35 inch (89
cm) long steel post with one end crimped for
insertion into another post of the same O.D.
Made of 18 gauge 1008-10 steel tubing, galvanized
using the Flo-Coat (zinc-chromate-polymer) process
for excellent corrosion protection.
When used with the EZ-48-3AB-125-35 Mast
assembly, this extension will raise the anemometer
to a height of 84 inches, with an effective
adjustment range of 72 to 89 inches (187.2 to 231.4
cm).
Figure 4
Mast Extension Installation
Figure 5
Reference . Insert the swaged end of Figure 5
the mast extension into the mounting tripod mast
and tighten so the extension does not rotate.
Repeat this step for additional mast extensions
(maximum two is recommended).


Produktspecifikationer

Varumärke: Ambient Weather
Kategori: ej kategoriserat
Modell: EZ-GWA

Behöver du hjälp?

Om du behöver hjälp med Ambient Weather EZ-GWA ställ en fråga nedan och andra användare kommer att svara dig