Apart MICPAT-2 Bruksanvisning

Apart mikrofon MICPAT-2

Läs gratis den bruksanvisning för Apart MICPAT-2 (1 sidor) i kategorin mikrofon. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 11.5 recensioner. Har du en fråga om Apart MICPAT-2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
Type : Table type
Polar pattern : Directional, low feedback
Frequency range : 80 Hz - 12 kHz
Sensitivity : 2.5 mV/PA @ 1 kHz
Rated output impedance : 600 Ohm, dynamic capsule
Paging : 2 zone, PTT switches + remote control
Cable Type : 5 wire + screen
Cable length : 5 m
Colour : black
Material : One piece diacast mold
Weight (incl. cable) : 0.850 kg
Dimensions 300 (h) X 170 (w) mm
Connection to a APart amplifi er
with Euroblock 5-Way
(connector not included)
This APart paging microphone is a sturdy high quality paging microphone.
It is specially designed for desk-top use.
The special design of the microphone capsule reduces the risk
of feedback drastically.
The MICPAT2 can be used for selective paging to 2 individual
zones or 2 groups of zones.
The APart amplifi er range has several models which can be operated by this
MICPAT2.
Usually a direct connection to the 5-way EURO-block on these amplifi ers will bring
your system into operation, without any batteries or DC-power needed.
In such set-up, the green light above the switch will light up when the
Push-To-Talk switch is pushed and the selected zone is free to accept your paging
via this microphone.

Produktspecifikationer

Varumärke: Apart
Kategori: mikrofon
Modell: MICPAT-2

Behöver du hjälp?

Om du behöver hjälp med Apart MICPAT-2 ställ en fråga nedan och andra användare kommer att svara dig