Bradley WBD1-0011 Bruksanvisning
Läs gratis den bruksanvisning för Bradley WBD1-0011 (12 sidor) i kategorin tvålpump. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 1.5 recensioner. Har du en fråga om Bradley WBD1-0011 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
1
WashBar
®
Maintenance Guide
1
2
3
CLEANING MATERIALS
1 Basin
For everyday cleaning, use a mild, neutral
base cleaner. For more aggressive cleaning,
use a Mr. Clean Magic Eraser.
Do not use a rough pad.
2 WashBar
For everyday cleaning, wipe gently with
a damp cloth and dry with a soft towel
such as microber or terry cloth.
Note: Do not use harsh abrasives. These
can scratch the chrome finish and sensors.
3 Stainless Steel Access Panel
For everyday cleaning, use a solution of warm
water with soap, detergent or ammonia.
TABLE OF CONTENTS
Cleaning Materials 1
WashBar Cleaning Model 2
Cleaning the Drain Cap and Trench Drain 3
WashBar LED Indicators 4
Relling the Soap (Below Deck Option) 5, 6
Relling the Soap (Top Fill Option) 7
How to Change Hand Dryer Speed 8, 9
How to Update WashBar Software 10
WB1 WBD1WB2
2
1 Place a hand under the dryer and then
immediately under the soap and hold
hands under both sensors for 5 seconds
until all LED lights turn solid White.
NOTE: LED lights will flash Red while
hands are under the WashBar.
1
2
3
WASHBAR CLEANING MODE
Cleaning mode temporarily disables the WashBar for 30 seconds so you can
clean the unit without the soap, water or dryer sensors activating.
2 When in Cleaning Mode, you can wipe down
the basin and the sensors on the WashBar.
NOTE: Use a soft cloth (microfiber or
terry cloth). It is NOT recommended to
use paper towels on sensor plates.
3 After 30 seconds, the WashBar will automatically
return to Standby Mode and be ready for use.
Note: See page 1 for proper cleaning materials
to use on the basin and WashBar.
3
1 Put the WashBar in Cleaning Mode.
See page 2 for instructions.
1
2
4
5
3
CLEANING THE DRAIN CAP AND THE TRENCH DRAIN
It’s recommended to remove the drain cap and clean the trench drain 2–3 times per month.
2 Use a at head screw driver or similar tool
and carefully remove the drain cap. Be
sure not to scratch the basin material.
3 Wipe down the strainer in the trench
drain and then remove it using a
phillips head screw driver.
4 Clean the trench drain and then
screw the strainer back in.
5 Place the drain cap back in the trench. Make
sure the drain cap is ush with the basin by
pushing down on the middle and sides.
Produktspecifikationer
| Varumärke: | Bradley |
| Kategori: | tvålpump |
| Modell: | WBD1-0011 |
Behöver du hjälp?
Om du behöver hjälp med Bradley WBD1-0011 ställ en fråga nedan och andra användare kommer att svara dig
tvålpump Bradley Manualer
26 Augusti 2025
tvålpump Manualer
Nyaste tvålpump Manualer
13 September 2025
19 Augusti 2025
19 Augusti 2025
9 Juni 2025