Cotech 922205 Bruksanvisning

Läs gratis den bruksanvisning för Cotech 922205 (5 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6 recensioner. Har du en fråga om Cotech 922205 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

GREAT BRITAIN • CUSTOMER SERVICEtel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

1

2

3

6

5

4

Ver. 20161213

15 W LED Work Light

Art.no 18-1325 Model 922205-UK

36-6500 922205

Please read theentire instruction manual before using theproduct and then

save it for future reference. Wereserve theright for any errors in text or images

and any necessary changes made to technicaldata. Ifyou have any questions

concerning technical problems please contact our Customer Services.

Safety

• TheLEDs in this work light have avery intensive light output. Donot let

children play with theworklight. Donot look directly into thelight or direct

thelight into another person’s eyes, doing so could cause eye damage.

• Do not touch thehousing or glass of thework light when it is switched on

– risk of burn injury.

• Do not install thework light near flammable materials or surfaces.

• Do not cover theworklight.

• Do not dismantle or modify theworklight.

• Themains lead should be checked regularly. Neveruse thework light if

themains lead or plug is damaged.

• Always unplug thework light from thepower point when it is not inuse.

Pulltheplug, not thelead.

• If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or qualified persons in order to avoid a hazard.

• Thework light is suitable for use in temperatures between −20 and +40 °C.

• Thework light should be connected to anearthed 230 V powerpoint.

• Check before use that thehousing, glass, power switch, mains lead and

plug are all undamaged. Anyfault or damage must be repaired immediately

by aqualified electrician before thework light isused.

• Do not use thework light near combustible or explosive liquids, solids orgases.

• Thework light must only be used when it is mounted on theincluded base

and bracket assembly. Thework light must not be mounted on awall

orceiling.

• Treat thework light with care and do not subject it to shocks or impacts.

• Thework light must not be immersed in water or other liquid.

Product descriptionOperating instructions

1. Connect themains lead to a230 V powerpoint.

2. Adjust thelamp housing to thedesiredangle.

3. Switch thework light on using thepower switch (6).

4. Switch off and unplug thework light afteruse.

1. Base

2. Bracket

3. Handle

4. Locking screws (star knob)

5. Lamphousing

6. Powerswitch

Assembly instructions

Attach thebracket and

thehandle (3) to thebase(1)

using two locking screws(4).

Responsible disposal

This symbol indicates that this product should not be disposed

of with general householdwaste. Thisapplies throughout

theentire EU. Inorder to prevent any harm to theenvironment

or health hazards caused by incorrect waste disposal,

theproduct must be handed in for recycling so that thematerial

can be disposed of in aresponsible manner. Whenrecycling

your product, take it to your local collection facility or contact

theplace of purchase. Theywill ensure that theproduct is

disposed of in anenvironmentally sound manner.

Specifications

Voltage 230V, 50/60Hz

Power 15W

Light source COB/Bridgelux LED

Luminousflux 1500lm

Colour temperature 4000K

Colour rendition > 80 Ra

Beamangle 120°

Ingress protection IP54

Protectionclass Class1 (this light fitting must be earthed)

Cable 1.8m rubber clad cable with earthed plug

(H07RN-F 3×1.0 mm²)

Size 220×185×210mm

Thelight source contained in this luminaire shall only

be replaced by themanufacturer or his service agent

or asimilar qualified person.

Care and maintenance

Unplug thework light and allow it to cool before cleaning.

Clean thelight using asoft, dampcloth. Useamild detergent.

Neveruse solvents or strong, abrasive cleaning agents.

Produktspecifikationer