Cotech AR0027 Bruksanvisning
Läs gratis den bruksanvisning för Cotech AR0027 (5 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 5 recensioner. Har du en fråga om Cotech AR0027 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
GREAT BRITAIN • CUSTOMER SERVICE
contact number: 08545 300 9799
e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
ENGLISH
1
2
3
4
5
6 7 8 9
10
11
Ver. 20131209
ALBIN LED Wall Light
Art.no 36-4855 Model AR0027-black
Please read theentire instruction manual before using theproduct and save it for future reference.
We reserve theright for any errors in text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact our Customer Services.
1. Location 1. UndotheM6 bolts and take off thewall bracket (2).
Don’t mix thewashers up.
2. Markout theposition of themounting holes on
thewall using thewall bracket as atemplate.
Drillholes for themounting screws (1). Usesuitable
screws and wall plugs if necessary. Thefloodlight
must be fixed securely. Beforestarting to drill, check
that there are no hidden electrical cables or water
pipes in thewall.
3. Removethebolts holding thejunction box cover
on, remove thecable gland and thestrain relief and
thread thepower cable (3G, 0.75) into thejunction
box through thecable gland and rubber grommet.
4. Connect thethree wires: L- Live (brown), N - Neutral
(blue) and - Electrical earth (green/yellow) to
theterminal block as marked in thejunction box.
Consider thefollowing
advice:
• The most suitable
height to mount
thelight at is
1.8–2.5m above
theground.
• Ideally, thelight
should be horizontal.
2. Installation
1. Wall screws
2. Wall bracket
3. Spring washer
4. Plain washer
5. M6bolt
6. Cablegland
7. Rubber
grommet
8. Lamp housing
9. Terminal block
10. Cable strain
relief withbolts
11. Junction
box cover
(withbolts)
5. Pushtheterminal block into thejunction box and
clamp thecable in place using thestrain relief.
Thenrefit thejunction boxcover.
6. Boltthelamp housing to thewall bracket.
7. Tiltthelamp housing to thedesired angle and tighten
thebolts (1).
8. Replace thefuse.
3. Disposal
This product should be disposed of in accordance with
local regulations. If you are unsure how to proceed,
contact your local authority.
4. Technical data
Ideal for use with motion detectors.
Mains supply 220–240 V AC, 50Hz
Power 20 W
Light source 14×1 W LED (non-replaceable)
Bright LEDs (6,500 K), 770lm
Aperture 210×130 mm
Protection class IP44 (approved for outdoor use)
Safety class Class 1 (this light fitting must
be earthed)
Important: Readtheentire instruction manual before
installation. Theinstallation should be carried out by
aqualified electrician and conform to current regulations.
Warning: Makesure that thepower is turned off and that
thefuse is removed before beginning any installation,
change of light bulb or service.
Produktspecifikationer
| Varumärke: | Cotech |
| Kategori: | Lättnad |
| Modell: | AR0027 |
Behöver du hjälp?
Om du behöver hjälp med Cotech AR0027 ställ en fråga nedan och andra användare kommer att svara dig
Lättnad Cotech Manualer
21 September 2024
16 September 2024
13 September 2024
4 September 2024
2 September 2024
30 Augusti 2024
30 Augusti 2024
28 Augusti 2024
27 Augusti 2024
24 Augusti 2024
Lättnad Manualer
- Maxxmee
- Ibiza Light
- Manfrotto
- GVM
- EMOS
- Beghelli
- Tellur
- Luxform Lighting
- Behringer
- LightPro
- American DJ
- Geemarc
- Auriol
- Fysic
- Magmatic
Nyaste Lättnad Manualer
9 April 2025
9 April 2025
9 April 2025
8 April 2025
8 April 2025
8 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025