Cotech DL25Q-W009A0-127 Bruksanvisning

Cotech Lättnad DL25Q-W009A0-127

Läs gratis den bruksanvisning för Cotech DL25Q-W009A0-127 (5 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 5.5 recensioner. Har du en fråga om Cotech DL25Q-W009A0-127 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
Ver. 20181126
LED Downlight
Art.no 36-7547 Model DL25Q-W009A0-127
36-7794 DL25Q-W009A0-027
Please read theentire instruction manual before using theproduct
and save it for future reference. We reserve theright for any
errors in text or images and any necessary changes made to
technical data. If you have any questions regarding technical
problems please contact our Customer Services.
Safety
Theproduct is intended for indoor use only (IP44).
Installation and maintenance may only be carried out by
aqualified tradesman according to local safety regulations.
Thelight fitting must not be used if any part is damaged.
It should either be discarded or repaired by aqualified
technician.
None of theproduct’s parts are to be disassembled or modied.
3. Unscrew theterminal block cover.
4. Hold down thecable holder on theterminal block and insert
theends of thewires. Pull gently on thepower lead to make
sure that thewires are firmly secured in theterminal block.
5. Screw theterminal block cover back on. Thecover also
functions as astrain relief.
6. Lift thespring clips up and mount thelight in a6873 mm hole.
Responsible disposal
Do not cover thedownlight with anything
that will hinder ventilation such as foil,
paper or plastic.
Make sure that thewires do not rub against sharp corners
or edges.
Therating label containing thetype designation must not be
removed or made illegible.
Theproduct must only be connected to a230 V AC
power supply.
Installation/mounting
Mounts in a68−73 mm diameter hole. Mounting depth: 70 mm.
Plan thelayout of thepower lead before you begin installation.
No minimum clearance from combustible surfaces is required
for LED bulbs.
1. Turn off thepower.
2. Strip theends of thewires as shown in thediagram.
Dimmable
This downlight can be dimmed using anLED
dimmer but works with most older, traditional
incandescent bulb dimmers and dimmers
designed for electronic transformers. For best
performance thedimmer might need adjusting
with theMax/Min screw.
This symbol indicates that this product should not
be disposed of with general household waste.
This applies throughout theentire EU. In order to
prevent any harm to theenvironment or health
hazards caused by incorrect waste disposal,
theproduct must be handed in for recycling so that
thematerial can be disposed of in aresponsible
manner. When recycling your product, take it to
your local collection facility or contact theplace
of purchase. They will ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specifications
Power supply 200–240 V AC, 50 Hz
Power 9 W
Protection class IP44
IP20
Light source Warm white LEDs (2,700 K), 540 lm
Beam angle 3
Size Mounting hole diam: 68−73 mm
Outer ring diam: 86 mm
Mounting depth: 70 mm
UNITED KINGDOM CUSTOMER SERVICE tel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk
postal 10 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
70 mm
60 mm
Ø 86 mm
Ø 65 mm
15 mm 8−10 mm


Produktspecifikationer

Varumärke: Cotech
Kategori: Lättnad
Modell: DL25Q-W009A0-127

Behöver du hjälp?

Om du behöver hjälp med Cotech DL25Q-W009A0-127 ställ en fråga nedan och andra användare kommer att svara dig