Cotech JF8100-20W Bruksanvisning

Cotech Lättnad JF8100-20W

Läs gratis den bruksanvisning för Cotech JF8100-20W (5 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 3.5 recensioner. Har du en fråga om Cotech JF8100-20W eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
GREAT BRITAIN • CUSTOMER SERVICE
contact number: 020 8247 9300
e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk
ENGLISH
Ver. 20161121
20 W Work Light
Art.no 18-2866 Model JF8100-20W-UK
36-5587 JF8100-20W
Please read theentire instruction manual before using theproduct and then save it for future reference.
We reserve theright for any errors in text or images and any necessary changes made to technicaldata.
In theevent of technical problems or other queries, please contact our Customer Services.
Safety
Read these instructions carefully before using theproduct.
Never let children use theproduct without adult supervision. Neverlook directly into thelight; it could damage
youreyesight.
Always unplug thelight when it is not inuse. Pulltheplug, not thelead.
Protect thework light from dust, water and extreme temperatures. Hightemperatures can damage thebulb.
Before use, check that theplug, lead, diffuser and casing are all undamaged. Ifany damage is detected, do not
use thelight until it has been repaired by aqualified technician.
Never cover theworklight.
Never use thework light in thevicinity of explosive gases or liquids.
TheLEDs cannot be replaced.
This light must not be dismantled or modified in anyway.
Thelight must only be used on thesupplied stand, it must never be mounted on awall or ceiling.
Treat thelight carefully and do not subject it to knocks andblows.
Thelight must only be connected to anearthed electrical socket.
Before using thelight, make sure that thesupply voltage corresponds to thelight’s rated voltage.
Operating instructions
1. Placethestand on afirm surface where it cannot tipover.
2. Adjust thetilt angle as necessary.
3. Plugthelight into awall socket.
Care and maintenance
Never use strong cleaning agents/solvents to clean theproduct. Cleanthelight using asoftcloth.
Always unplug thelight before cleaningit.
Disposal
This product should be disposed of in accordance with local regulations.
Ifyou are unsure how to proceed, contact your local council.
Specifications
Voltage 220–240 V AC, 50 Hz
Bulb 1×20W LED
Lead 1.8 m rubber-clad cable H05RN-F 3×0.75 mm²
IP rating IP54
Class 1


Produktspecifikationer

Varumärke: Cotech
Kategori: Lättnad
Modell: JF8100-20W

Behöver du hjälp?

Om du behöver hjälp med Cotech JF8100-20W ställ en fråga nedan och andra användare kommer att svara dig