Doepfer A-151v Bruksanvisning


Läs gratis den bruksanvisning för Doepfer A-151v (12 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 39 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 20 recensioner. Har du en fråga om Doepfer A-151v eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/12
doepfer System A - 100 VCO A-110
1
1. Introduction
Module A-110 (VCO) is a voltage-controlled oscilla-
tor.
This VCO’s frequency range is about ten octaves. It
can produce four waveforms simultaneously: square,
sawtooth, triangle, and sine wave.
The Frequency or pitch of the VCO is determined by
the position of the octave (Range) switch and tuning
(Tune) knob, and by the voltage present at the CV
inputs. Frequency modulation (FM) of the VCO is
therefore a possibility. Footage (the octave of the
fundamental) is set by the Range control, and Fine
tuning controlled by the Tune knob.
You can control the pulse width of the square wave
either by hand, or by voltage control - Pulse Width
Modulation or PWM.
H Because of the analog nature of the design,
the VCO may need about 20 minutes’ warm-
up time for the tuning to become completely
stable.
SYNC
CV 2
CV 2
PW CV 1
PW CV 2
PW CV 2
PW
CV 1 Range
A-110
VCO
Tune


Produktspecifikationer

Varumärke: Doepfer
Kategori: Inte kategoriserad
Modell: A-151v

Behöver du hjälp?

Om du behöver hjälp med Doepfer A-151v ställ en fråga nedan och andra användare kommer att svara dig