Doepfer A-178 Bruksanvisning


Läs gratis den bruksanvisning för Doepfer A-178 (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 40 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 20.5 recensioner. Har du en fråga om Doepfer A-178 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
doepfer System A - 100 Theremin A-178
1
1. Introduction
Module A-178 (Theremin Voltage Source) produces
a variable control voltage which gets bigger the
closer your hand gets to its antenna.
You can use this control voltage in any modulation or
control process, and thus have access to an extra
system of real-time control in the synthesis process.
You use the Offset control to set the null point (zero)
of the control voltage output. Two LEDs give a visual
indication of the voltages produced.
The module also produces a gate signal at the gate
output: the signal goes "high" as soon as a voltage is
sensed which is above the threshold set with the
Threshold control. An LED gives a visual indication
of the presence of a gate signal.
This gives you the ability to produce a gate signal
simply by moving your hand.
A-178
Theremin Volt. Source
Antenna
Threshold
+
-
CV Out
Gate Out
Offset


Produktspecifikationer

Varumärke: Doepfer
Kategori: Inte kategoriserad
Modell: A-178
Färg på produkten: Zilver
Bredd: 203 mm
Djup: 260.35 mm
Höjd: 355.6 mm
Kompatibilitet: iPad Air 2, iPad Pro
Maximal skärmstorlek: 14 "
Minsta skärmstorlek: 9 "

Behöver du hjälp?

Om du behöver hjälp med Doepfer A-178 ställ en fråga nedan och andra användare kommer att svara dig