Doepfer A-160 Bruksanvisning
Doepfer
Inte kategoriserad
A-160
Läs gratis den bruksanvisning för Doepfer A-160 (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 13 recensioner. Har du en fråga om Doepfer A-160 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
doepfer System A - 100 Clock Divider A-160
1
1. Introduction
Module A-160 (Clock Divider) is a frequency divider
for clock signals, designed to be a source of lower
frequencies, particularly for rhythm uses.
The Trigger input will take clock signals from, eg., an
LFO, MIDI sync, or the gate from a MIDI-CV interface.
At the outputs, you have access to the sub-divided
clock signals, from half the clock frequency down to
1/64.
The A-160 also has a reset input. Whenever a reset
signal is sensed, all outputs are set to zero, until the
reset voltage disappears.
The Clock Divider can be used in combination with the
A-161 Clock Sequencer to produce stepped sequen-
ces with a length of from one to eight events.
/ 2
/ 4
/ 8
/ 16
/ 32
/ 64
Trig.
In
Res.
In
A-160
CLOCK
DIVIDER
A-160 Clock Divider System A - 100 doepfer
2
2. Overview Indicators:
1 LED : Clock / 2 indicator
2 LED : Clock / 4 indicator
3 LED : Clock / 8 indicator
4 LED : Clock / 16 indicator
5 LED : Clock / 32 indicator
6 LED : Clock / 64 indicator
In / Outputs:
! Trig. In : clock signal input
" Res. In : reset input
§ /2 : 1/2 clock frequency output
$ /4 : 1/4 clock frequency output
% /8 : 1/8 clock frequency output
& /16 : 1/16 clock frequency output
/ /32 : 1/32 clock frequency output
( /64 : 1/64 clock frequency output
A-160
CLOCK
DIVIDER
/ 2
/ 4
/ 8
/ 16
/ 32
/ 64
Trig.
In
Res.
In
➀
➁
➂
➃
➄
➅
doepfer System A - 100 Clock Divider A-160
3
3. Indicators
1 LED ... 6 LED
LEDs 1 to 6 indicate the status of each of the sub-
divided frequencies at outputs § to (.
4. In / Outputs
! Trig. In
Trigger input: patch the frequency to be divided in
here.
" Res. In
Socket " is the reset input for the A-160. When a
reset voltage is sensed, all outputs go to zero, for as
long as the reset voltage is present. (ie. a ‘static
reset’)
H With a Clock Sequencer (A-161) connected,
every time the A-160 senses a reset signal,
the A-161 returns to output ! .
P With the help of the reset input, you can
produce sequences with less than eight
steps. For instance, by patching output / of
the A-161 to the reset input socket " of the
A-160 you get a six-step sequence. (Instead
of going to step seven, it resets to step one.)
§ /2 ... ( /64
Sockets § to ( are the A-160 outputs, from which the
sub-divided clock signals are available.
5. User examples
"Ping-Pong" effect
The patch in Fig. 1 produces a "Ping-Pong" effect: with
each note on the keyboard (gate signal) the audio
jumps between left and right outputs - OutL and OutR .
The A-160 is halving the gate frequency, and trigge-
ring the A-150 VCS, so that each of its outputs is
active only every other note.
ADSR envelope with re-triggering
In the patch in Fig. 2, an ADSR is re-triggered by a
square wave LFO, sub-divided in the A-160 by a factor
of four (output $). The original whole LFO oscillation is
patched to the re-trigger input on the ADSR. In this
way, a new repeating envelope is created.
Produktspecifikationer
| Varumärke: | Doepfer |
| Kategori: | Inte kategoriserad |
| Modell: | A-160 |
Behöver du hjälp?
Om du behöver hjälp med Doepfer A-160 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Doepfer Manualer
21 September 2024
9 September 2024
9 September 2024
8 September 2024
8 September 2024
8 September 2024
8 September 2024
7 September 2024
7 September 2024
7 September 2024
Inte kategoriserad Manualer
- Graflex
- N8WERK
- Murr Elektronik
- Cisco
- Infinity
- Soul
- NeoMounts
- BeamZ
- AvaTime
- TechLogix Networx
- Lexibook
- Hugo Muller
- Mivar
- Syma
- Siemon
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025