EarthQuaker Devices Bit Commander Bruksanvisning


Läs gratis den bruksanvisning för EarthQuaker Devices Bit Commander (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 13 recensioner. Har du en fråga om EarthQuaker Devices Bit Commander eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
OPERATION MANUAL
©2018 EarthQuaker Devices LLC
<<< Power Requirements >>>
<<< Tech Specs >>>
Current Draw: 25mA
This device take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We
always recommend pedal-specic, transformer-isolated wall-wart power supplies or multiple
isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.
Switching-type power supplies, daisy chains and non-pedal specic power supplies do not lter
dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
Input Impedance: 50K Ohm Output Impedance: <500 Ohm
<<< Warranty >>>
This device has a limited lifetime warranty. If it breaks, we will x it. Should you encounter any
issues, please email info@earthquakerdevices.com.
www.earthquakerdevices.com
<<< Switching >>>
This device is true bypass and uses electronic relay-based switching. Audio will not pass
without power.


Produktspecifikationer

Varumärke: EarthQuaker Devices
Kategori: Inte kategoriserad
Modell: Bit Commander

Behöver du hjälp?

Om du behöver hjälp med EarthQuaker Devices Bit Commander ställ en fråga nedan och andra användare kommer att svara dig