EarthQuaker Devices Spatial Delivery Bruksanvisning


Läs gratis den bruksanvisning för EarthQuaker Devices Spatial Delivery (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 14 recensioner. Har du en fråga om EarthQuaker Devices Spatial Delivery eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
OPERATION MANUAL
©2018 EarthQuaker Devices LLC
www.earthquakerdevices.com
<<< Power Requirements >>>
<<< Tech Specs >>>
Current Draw: 68mA
This device take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We
always recommend pedal-specic, transformer-isolated wall-wart power supplies or multiple
isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.
Switching-type power supplies, daisy chains and non-pedal specic power supplies do not lter
dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
Input Impedance: 500K Ohm Output Impedance: <1K Ohm
<<< Warranty >>>
This device has a limited lifetime warranty. If it breaks, we will x it. Should you encounter any
issues, please email info@earthquakerdevices.com.
<<< Flexi-Switching >>>
This device features Flexi-Switch
Technology! This relay-based, true bypass switching style
allows you to simultaneously use momentary and latching-style switching.
For standard latching operation, tap the footswitch once to activate the effect and then tap
again to bypass.
For momentary operation, hold the footswitch down for as long as you’d like to use the effect.
Once you release the switch, the effect will be bypassed.
Since the switching is relay-based, it requires power to pass signal.


Produktspecifikationer

Varumärke: EarthQuaker Devices
Kategori: Inte kategoriserad
Modell: Spatial Delivery

Behöver du hjälp?

Om du behöver hjälp med EarthQuaker Devices Spatial Delivery ställ en fråga nedan och andra användare kommer att svara dig