ECS HDC-M/C-60 Bruksanvisning

ECS moderkort HDC-M/C-60

Läs nedan 📖 manual på svenska för ECS HDC-M/C-60 (60 sidor) i kategorin moderkort. Denna guide var användbar för 22 personer och betygsatt med 4.3 stjärnor i genomsnitt av 11.5 användare

Ladda ner PDF

Sida 1/60

Preface

This publication, including all photographs, illustrations and software, is protected

any of the material contained herein, may be reproduced without written consent of

the author.

Version 2.0

Disclaimer

The information in this document is subject to change without notice. The manufac-

turer makes no representations or warranties with respect to the contents hereof and

specifically disclaims any implied warranties of merchantability or fitness for any

particular purpose. The manufacturer reserves the right to revise this publication and

to make changes from time to time in the content hereof without obligation of the

manufacturer to notify any person of such revision or changes.

Trademark Recognition

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corp.

AMD, Phenom, Athlon, Sempron and Duron are registered trademarks of AMD

Corporation.

Other product names used in this manual are the properties of their respective

owners and are acknowledged.

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful inter-

ference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment onto an outlet on a circuit different from that to

which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Shielded interconnect cables and a shielded AC power cable must be employed with

this equipment to ensure compliance with the pertinent RF emission limits govern-

ing this device. Changes or modifications not expressly approved by the system’s

manufacturer could void the user’s authority to operate the equipment.

Preface

Declaration of Conformity

This device complies with part 15 of the FCC rules. Operation is subject to the

following conditions:

• This device may not cause harmful interference

• This device must accept any interference received, including interfer-

ence that may cause undesired operation

Canadian Department of Communications

This class B digital apparatus meets all requirements of the Canadian Interference-

causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur

le matériel brouilieur du Canada.

About the Manual

The manual consists of the following:

Chapter 1

Introducing the Motherboard

Chapter 2

Installing the Motherboard

Chapter 3

Using BIOS

Chapter 4

Using the Motherboard Software

Describes features of the

motherboard.

Go to page 1

Describes installation of

motherboard components.

Go to page 7

Provides information on us-

ing the BIOS Setup Utility.

Go to page 21

Describes the motherboard

software

Go to page 49

Chapter 5

Trouble Shooting

Provides basic trouble

shooting tips

page 53

Go to 

iii

TABLE OF CONTENTSABLE OF CONTENTS

ABLE OF CONTENTSABLE OF CONTENTS

ABLE OF CONTENTS

Preface i

Chapter 1

Introducing the Motherboard 1

Introduction......................................................................................1

Feature...............................................................................................2

Motherboard Components.............................................................5

Chapter 2 7 7

7 7 7

Installing the Motherboard 7

Safety Precautions...........................................................................7

Choosing a Computer Case............................................................7

Installing the Motherboard in a Case............................................7

Checking Jumper Settings...............................................................8

Setting Jumpers...................................................................8

Checking Jumper Settings...................................................9

Jumper Settings...................................................................9

Installing Hardware........................................................................10

Installing Memory Modules...............................................10

Expansion Slots..................................................................11

Connecting Optional Devices............................................13

Installing a SATA Hard Drive............................................16

Connecting I/O Devices................................................................17

Connecting Case Components.....................................................18

Front Panel Header............................................................20

Chapter 3 21

Using BIOS 21

About the Setup Utility................................................................ 21

The Standard Configuration..............................................21

Entering the Setup Utility....................................................21

Resetting the default CMOS values....................................22

Using BIOS......................................................................................22

BIOS Navigation Key.........................................................23

Main Menu.........................................................................26

Advanced Menu..................................................................27

Chipset Menu.....................................................................38

M.I.B III Menu...................................................................40

Boot Menu..........................................................................41

Introducing the Motherboard

Chapter 1

Introducing the Motherboard

Introduction

Thank you for choosing the HDC-M motherboard of high performance, enhanced

function. This motherboard has an onboard APU AMD

® Brazos C-60 Dual Core

processor with AMD RadeonTM HD 6290 Graphics, design with a Micro-ATX form

factor of 225 x 170 mm.

The motherboard is equipped with advanced full set of I/O ports in the rear panel,

including PS/2 keyboard and mouse connectors, one DVI port (optional HDMI port),

one VGA port, six USB 2.0 ports, one LAN port, and audio jacks for microphone,

line-in and line-out.

The motherboard incorporates the AMD Hudson D1 FCH chipset. It supports two

PCI slots which are fully compliant to PCI rev 2.2 specification at 33 MHz. One

PCIE16X slot runs at p5-x4 bandwidth which is fully compliant to the PCI Express Base

Specification revision 2.0. This motherboard supports up to 8 GB of system memory

with single channel DDR3 1333(OC)/1066MHz. It implements an EHCI compliant

interface that provides twelve USB 2.0 ports (six USB 2.0 ports at the rear panel and

three USB 2.0 headers support additional six USB 2.0 ports).

Introducing the Motherboard

Feature

The motherboard uses onboard AMD FT1 CPU that carries the following fea-

tures:

Processor

•The AMD FT1 processor combines the central processing unit (CPU)

with the graphics processing unit (GPU) in a single-chip Accelerated

Processing Unit (APU) package.

•The APU connects to the Fusion Controller Hub (FCH) through the

Unified Media Interface (UMI) to provide connections to the different

system devices.

Chipset

Memory

• Supports DDR3 1333(OC)/1066 SDRAM with single-channel archi-

tecture

• Accommodates two unbuffered DIMMs

• Up to 4GB per DIMM with maximum memory size up to 8GB

The AMD Hudson D1 FCH Chipset is a single-chip with proven reliability and

performance.

• PCI slots compliant with PCI Rev 2.2 interface at 33 MHz

• Integrated SATA 3.0 Gb/s Host Controller

• Twelve USB 2.0 ports supported

• Supports Unified Media interface (UMI), SMBus controller, and High

Definition Audio

• Supports Serial Peripheral Interface (SPI)

• Enhanced DMA Controller, power management, hardware monitoring,

interrupt controller, and clock function.

Onboard LAN (optional)

• Supports PCI ExpressTM 1.1

• Integrated 10/100/1000 transceiver

• Integrated Switching Regulator

• Wake-on-LAN and remote wake-up support

• Supports PCI ExpressTM 1.1

• Integrated 10/100 transceiver

• Integrated Linear Regulator

• Wake-on-LAN and remote wake-up support

Introducing the Motherboard

Audio

This motherboard may support the following Audio chipset:

• 5.1 Channel High Definition Audio Codec

• ADCs support 44.1k/48k/96kHz sample rate

• Meets Microsoft WLP 3.10 Vista premium and mobile PCs audio

requirements

• Direct Sound 3DTM compatible

1.Some hardware specifications and software items are subject to change

without prior notice.

2.Due to chipset limitation, we recommend that motherboard be oper-

ated in the ambiance between 0 and 50° C.

The motherboard comes with the following expansion options:

•Two PCI slots

•One PCI Express x16 slot (with p7-x4 mode)

•Four 7-pin SATA connectors

Expansion Options

• One PS/2 keyboard and PS/2 mouse connect port

•One DVI port (optional HDMI port)

•One VGA port

•Six USB 2.0 ports

•One LAN port

•Audio jacks for microphone, line-in and line-out

The motherboard has a full set of I/O ports and connectors:

Integrated I/O

The firmware can also be used to set parameters for different processor clock

speeds.

•Power management

•Wake-up alarms

•CPU parameters

•CPU and memory timing

BIOS Firmware

This motherboard uses AMI BIOS that enables users to configure many system

features including the following:

Introducing the Motherboard

• AMD Hudson D1 FCH

• Onboard APU AMD® Brazos C-60 Dual Core processor with

AMD RadeonTM HD 6290 Graphics

• Single-channel DDR3 memory architecture

• 2 x 240-pin DDR3 DIMM sockets support up to 8 GB

• Supports 1333(OC)/1066 DDR3 SDRAM

• Supported by AMD Hudson D1 FCH

• 4x Serial ATA 3Gb/s devices

•Realtek ALC662 supports 6-channel HD audio Codec

• Realtek RTL8105E 10/100 LAN (Colay RTL8111-VL Giga

LAN)

• 1 x PS/2 keyboard & mouse connectors

• 1 x DVI port (optional HDMI port)

• 1 x VGA port

• 6 x USB 2.0 ports

• 1 x RJ45 LAN connector

• 1 x Audio port (Line in, microphone in, line out)

Chipset

Memory

Expansion

Slots

Storage

Audio

LAN

Rear Panel I/O

CPU

Specifications

• 2 x PCI slots

• 1 x PCI Express x16 slot (with p8-x4 mode)

Form Factor • mATX 225mm x 170mm

• AMI BIOS with 32Mb SPI Flash ROM

• Supports ACPI & DMI

• Supports Plug and Play, STR(S3)/STD(S4), Hardware monitor

• Audio, LAN, can be disabled in BIOS

• Supports Dual Display (optional)

System BIOS

Internal I/O

Connectors &

Headers

• 1 x 3-pin SYS_FAN connector

• 1 x 4-pin CPU_FAN connector

• 1 x 24-pin ATX Power Supply connector

• 1 x Speaker header

• 1 x Front panel audio header

• 4 x SATA 3Gb/s connectors

• 1 x SPI_DEBUG header

• 3 x USB 2.0 headers support additional six USB 2.0 ports

• 1 x COM header

• 1 x CASE open header

• 1 x Clear CMOS jumper

• 1 x LPT header

• 1 x TPM header

• 1 x SPDIF Out header

• 1 x Front panel switch/LED header

Introducing the Motherboard

Motherboard Components

Table of Motherboard Components

This concludes Chapter 1. The next chapter explains how to install the motherboard.

LABEL COMPONENTS

1. CPU_FAN CPU cooling fan connector

2. DDR3_1~2 240-pin DDR3 SDRAM slots

3. ATX_POWER Standard 24-pin ATX power connector

4. SATA1~4 Serial ATA 3Gb/s connectors

5. SPK Speaker header

6. F_PANEL Front panel switch/LED header

7. F_USB1~3 Front panel USB 2.0 headers

8. TPM Trusted Platform Module header (Optional)

9. SPDIFO SPDIF out header

10. LPT Onboard parallel port header

11.COM Onboard serial port header

12. PCI1~2 32-bit add-on card slots

13. CASE CASE open header

14. F_AUDIO1 Front panel audio header

15. PCIE16X PCI Express 16x slot for graphics interface

16. CLR_CMOS Clear CMOS jumper

Introducing the Motherboard

Memo

Installing the Motherboard

Chapter 2

Installing the Motherboard

Safety Precautions

• Follow these safety precautions when installing the motherboard

• Wear a grounding strap attached to a grounded device to avoid dam-

age from static electricity

• Discharge static electricity by touching the metal case of a safely

grounded object before working on the motherboard

• Leave components in the static-proof bags they came in

• Hold all circuit boards by the edges. Do not bend circuit boards

Choosing a Computer Case

There are many types of computer cases on the market. The motherboard complies

with the specifications for the Micro ATX system case. Some features on the

motherboard are implemented by cabling connectors on the motherboard to indica-

tors and switches on the system case. Make sure that your case supports all the

features required. Make sure that your case has sufficient power and space for all

drives that you intend to install.

Most cases have a choice of I/O templates in the rear panel. Make sure that the I/O

template in the case matches the I/O ports installed on the rear edge of the

motherboard.

This motherboard carries an MATX form factor of 225 x 170 mm. Choose a case

that accommodates this form factor.

Installing the Motherboard in a Case

Refer to the following illustration and instructions for installing the motherboard in

a case.

Most system cases have mounting brackets installed in the case, which correspond

the holes in the motherboard. Place the motherboard over the mounting brackets

and secure the motherboard onto the mounting brackets with screws.

Ensure that your case has an I/O template that supports the I/O ports and expansion

slots on your motherboard.

Installing the Motherboard

Checking Jumper Settings

This section explains how to set jumpers for correct configuration of the motherboard.

Setting Jumpers

Use the motherboard jumpers to set system configuration options. Jumpers with

more than one pin are numbered. When setting the jumpers, ensure that the jumper

caps are placed on the correct pins.

The illustrations show a 2-pin jumper. When

the jumper cap is placed on both pins, the

jumper is SHORT. If you remove the jumper

cap, or place the jumper cap on just one pin,

the jumper is OPEN.

This illustration shows a 3-pin jumper. Pins

1 and 2 are SHORT.

SHORT OPEN

Do not over-tighten the screws as this can stress the motherboard.

Installing the Motherboard

Checking Jumper Settings

The following illustration shows the location of the motherboard jumpers. Pin 1 is

labeled.

Jumper Settings

Jumper Type Description Setting (default)

CLR_CMOS 3-pin CLEAR CMOS

1-2: NORMAL

2-3: CLEAR

Before clearing the

CMOS, make sure to

turn the system off. CLR_CMOS

To avoid the system instability after clearing CMOS, we recommend users

to enter the main BIOS setting page to “Load Default Settings” and

then “Save & Exit Setup”.

Installing the Motherboard

Installing Memory Modules

This motherboard accommodates two memory module. It can support two 240-pin

DDR3 1333(OC)/1066. The total memory capacity is 8 GB.

Do not remove any memory module from its antistatic packaging

until you are ready to install it on the motherboard. Handle the

modules only by their edges. Do not touch the components or metal

parts. Always wear a grounding strap when you handle the modules.

Installation Procedure

Refer to the following to install the memory modules.

1 This motherboard supports unbuffered DDR3 SDRAM.

2 Push the latches on each side of the DIMM slot down.

3 Align the memory module with the slot. The DIMM slots are keyed with

notches and the DIMMs are keyed with cutouts so that they can only be

installed correctly.

4 Check that the cutouts on the DIMM module edge connector match the

notches in the DIMM slot.

5 Install the DIMM module into the slot and press it firmly down until it

seats correctly. The slot latches are levered upwards and latch on to

the edges of the DIMM.

6 Install any remaining DIMM modules.

Installing Hardware

You must install at least one module in any of the two slots.

DDR3 SDRAM memory module table

Memory module Memory Bus

DDR3 1333(OC) 667 MHz

DDR3 1066 533 MHz

* For reference only

Installing the Motherboard

Installing Add-on Cards

The slots on this motherboard are designed to hold expansion cards and connect

them to the system bus. Expansion slots are a means of adding or enhancing the

motherboard’s features and capabilities. With these efficient facilities, you can in-

crease the motherboard’s capabilities by adding hardware that performs tasks that are

not part of the basic system.

Expansion Slots

PCI1~2 Slots This motherboard is equipped with two standard PCI slots. PCI

stands for Peripheral Component Interconnect and is a bus standard

for expansion cards, which for the most part, is a supplement of the

older ISA bus standard. The PCI slots on this board are PCI v2.2

compliant.

PCIE16X Slot The PCI Express 16x slot is used to install an external PCI Express

graphics card is fully compliant to the PCI Express Base Specifica-

tion revision 2.0. This PCI Express 16x slot runs at 4x bandwidth.

Before installing an add-on card, check the documentation for the

card carefully. If the card is not Plug and Play, you may have to

manuallly configure the card before installation.

Installing the Motherboard

Follow these instructions to install an add-on card:

1 Remove a blanking plate from the system case corresponding to the

slot you are going to use.

2 Install the edge connector of the add-on card into the expansion slot.

Ensure that the edge connector is correctly seated in the slot.

3 Secure the metal bracket of the card to the system case with a screw.

For some add-on cards, for example graphics adapters and network adapt-

ers, you have to install drivers and software before you can begin using the

add-on card.

* For reference only

Installing the Motherboard

F_AUDIO: Front Panel Audio header

This header allows the user to install auxiliary front-oriented microphone and line-

out ports for easier access.

Connecting Optional Devices

Refer to the following for information on connecting the motherboard’s optional

devices:

1 2PORT 2L AUD_GND

3 4PORT 2R PRESENCE#

5 6PORT 2R SENSE1_RETURN

7 8SENSE_SEND KEY

Pin Signal Name Pin Signal Name

9PORT 2L 10 SENSE2_RETURN

SATA1~4: Serial ATA connectors

These connectors are used to support the new Serial ATA 3Gb/s devices, simpler disk

drive cabling and easier PC assembly. It eliminates limitations of the current Parallel

ATA interface. But maintains register compatibility and software compatibility with

Parallel ATA.

1 2Ground TX+

3 4TX- Ground

5 6RX- RX+

7 -Ground -

Pin Signal NamePin Signal Name

Installing the Motherboard

CASE: Chassis Intrusion Detect Header

Short Case Open

Open Case Close

Pin 1-2 Function

F_USB1~3: Front Panel USB 2.0 headers

The motherboard has six USB 2.0 ports installed on the rear edge I/O port array.

Additionally, some computer cases have USB 2.0 ports at the front of the case. If you

have this kind of case, use auxiliary USB 2.0 connector to connect the front-

mounted ports to the motherboard.

Please make sure that the USB cable has the same pin assignment as

indicated above. A different pin assignment may cause damage or system

hang-up.

1 USBPWR Front Panel USB Power

2 USBPWR Front Panel USB Power

3 USB_FP_P0- USB Port 0 Negative Signal

4 USB_FP_P1- USB Port 1 Negative Signal

5USB_FP_P0+ USB Port 0 Positive Signal

6 USB_FP_P1+ USB Port 1 Positive Signal

7 GND Ground

8 GND Ground

9Key No pin

10 USB_FP_OC0 Overcurrent signal

Pin Signal Name Function

1DCD Data Carrier Detect

2SIN Serial Input

3SOUT Serial Output

4DTR Data Terminal Ready

5GND Ground

6DSR Data Set Ready

7RTS Request to Send

8 CTS Clear to Send

9 RI Ring Indicator

10 Key No pin

Pin Signal Name Function

COM: Onboard serial port header

Connect a serial port extension bracket to this header to add a second serial port to

your system.

This detects if the chassis cover has been removed. This function needs a chassis

equipped with instrusion detection switch and needs to be enabled in BIOS.

Installing the Motherboard

TPM (Optional): TPM module header

Trusted Platform Module (TPM) is a published specification detailing a

microcntrollerthat can store secured information, and implementations of that speci-

fication.

1TPM_CLK 11 LAD0

2GND 12 GND

3LFRAME# 13 RESERVE0

4KEY 14 RESERVE1

5LREST# 15 VCC3_DUAL

6VCC5 16 SERIRQ

7LAD3 17 GND

8LAD2 18 CLKRUN#

9VCC3 19 LPCPD#

10 LAD1 20 RESERVE2

Pin Signal Name Pin Signal Name

LPT: Onboard parallel port header

This is a header that can be used to connect to the printer, scanner or other devices.

SPDIFO: SPDIF out header

2+5VA 5V analog Power

3 Key No pin

4 GND Ground

Pin Signal Name Function

1SPDIF SPDIF digital output

This is an optional header that provides an S/PDIF (Sony/Philips Digital Interface)

output to digital multimedia device through optical fiber or coaxial connector.

1STROBE 14 ALF

2PD0 15 ERROR

3PD1 16 INIT

4PD2 17 SLCTIN

5PD3 18 Ground

6PD4 19 Ground

7 20 PD5 Ground

Pin Signal Name Pin Signal Name

8 PD6 21 Ground

9PD7 22 Ground

10 ACK 23 Ground

11 BUSK 24 Ground

12 PE 25 Ground

13 SLCT 26 Key

Installing the Motherboard

Refer to the illustration below for proper installation:

1 Attach either cable end to the connector on the motherboard.

2 Attach the other cable end to the SATA hard drive.

3 Attach the SATA power cable to the SATA hard drive and connect the

other end to the power supply.

SATA cable (optional) SATA power cable (optional)

Installing a SATA Hard Drive

This section describes how to install a SATA hard drive.

About SATA Connectors

Your motherboard features four SATA connectors supporting a total of four drives.

SATA refers to Serial ATA (Advanced Technology Attachment) is the standard inter-

face for the IDE hard drives which are currently used in most PCs. These connectors

are well designed and will only fit in one orientation. Locate the SATA connectors on

the motherboard and follow the illustration below to install the SATA hard drives.

Installing Serial ATA Hard Drives

To install the Serial ATA (SATA) hard drives, use the SATA cable that supports the

Serial ATA protocol. This SATA cable comes with one SATA power cable. You can

connect either end of the SATA cable to the SATA hard drive or the connector on the

motherboard.

* For reference only

This motherboard supports the “Hot-Plug” function.

Installing the Motherboard

Connecting Case Components

After you have installed the motherboard into a case, you can begin connecting the

motherboard components. Refer to the following:

Connecting 24-pin power cable

1 Connect the CPU cooling fan cable to CPU_FAN.

2 Connect the System cooling fan connector to SYS_FAN.

3 Connect the case switches and indicator LEDs to the F_PANEL.

4 Connect the standard power supply connector to ATX_POWER.

5 Connect the case speaker cable to SPK.

The ATX 24-pin connector allows you to connect to ATX v2.x power supply.

With ATX v2.x power supply, users please

note that when installing 24-pin power

cable, the latches of power cable and the

ATX match perfectly.

Connecting 24-pin power cable

24-pin power cable

Produktspecifikationer

Varumärke:	ECS
Kategori:	moderkort
Modell:	HDC-M/C-60
Färg på produkten:	Wit
Vikt:	5890 g
Bredd:	270 mm
Djup:	430 mm
Höjd:	340 mm
Antal program:	205
Snäll:	Computergestuurde naaimachine
Beeldscherm:	LCD
Typ av mat:	Electrisch
Inbyggt ljus:	Ja
Symaskinens funktioner:	Naaiwerk
Fri arm:	Ja
Automatiskt knapphål:	Ja
Typ av knapphål:	1 stap
Antal stygnmönster:	150
Automatisk nålträdare:	Ja
Antal-teckensnitt:	1
Syhastighet:	850 steken per minuut
Suturlängd:	5 mm
Pinns bredd:	7 mm
Nålens toppläge:	Ja