Gira 5561000 Bruksanvisning

Gira Intercomsystem 5561000

Läs gratis den bruksanvisning för Gira 5561000 (2 sidor) i kategorin Intercomsystem. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 8 recensioner. Har du en fråga om Gira 5561000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

General safety instructions

These instructions are part of the product

and must remain with the end customer.

Necessary accessories

• System 106 intercom module (Item no.

5563 ..) with call-button module

(item no. 555. ..) or door station module

(Item no. 5565 9..).

• Video control device (item no. 1288 00).

• Gira home station video (e.g. surface-

mounted home station video Plus).

• System 106 surface-mounted housing,

1-gang to 5-gang (Item no. 5501 ...,

5502 ..., 5503 ..., 5504 ..., 5505 ...).

Accessories

• Power supply for door communication

DC 24 V 300 mA (item no. 1296 00).

Functional description

The camera module adds the "Video"

functionality to the Gira door

communication system 106.

Scope of supply

1 x System 106 camera module

1 x operating instructions

1 x video cable, short

1 x video cable, long

Ensure the package contents are complete

and undamaged. When filing complaints,

see "Warranty".

Device description

Front view

Electrical devices may only be

installed and connected by a

qualified electrician.

1 Glass front

2 Camera lens aperture

Rear view

Range of detection

Selecting installation site

Observe the following when selecting the

installation site:

•No back light: Do not point the camera

towards a strong back light source, such

as a street light or garden lights. Do not

expose lens to direct sunlight.

•Image background: Do not point camera

to extremely bright image backgrounds

with strong contrasts.

•Lighting: If there is additional lighting in

the entrance area, this should not shine

directly onto the camera lens from the

front (see "back light").

•Mounting height: 1.5 m

(recommendation).

•Angle of detection: 100°

1 Turn-type lock (4 x)

2 Rotary switch: Select image area (0-9)

3 Slot (2 x): System cable

4 Slot: Video cable

5 Glass front mounting (4 x)

1,5 m

1,0 m 3,0 m

100°

1,26 m

1,00 m

Drehknopf Position 9

80°

0,8 m

Drehknopf Position 0

1,00 m

60°

Camera heating

The camera has two internal heaters.

When local conditions cause rapid climatic

changes, the second heater is needed to

prevent the cover glass from fogging up.

If the second heater is used, an additional

power supply is required.

The first heater is automatically activated at

a temperature of < 6 °C and is deactivated

at +12 °C.

Night mode

Noise reduction mode (NR)

The NR mode prevents the camera image

from developing image noise in twilight

conditions.

Infrared illumination

In night mode, IR illumination enables a

glare-free illumination of the field of view.

When an additional power supply is used,

the effective range of the IR illumination

increases to 3 m.

High light compensation (HLC) function

The HCL function serves to invert bright

areas in night mode. Very bright areas are

inverted to black (e.g. car headlights).

Wide dynamic function (WD)

The WD functions automatically adapts the

camera image brightness ensuring that all

image areas are clearly visible. This makes

persons present in dark areas of the camera

image visible.

Installing the module

Automatic changeover to night

mode

For the duration of an active conversation,

the camera automatically switches to night

mode as from a brightness value of < 1 lx.

Night mode = b/w image and HLR is active.

Infrared illumination is only active if this

function has previously been set at the

home station.

Installing the module

The installation instructions for the

System 106 surface-mounted 1-gang to 5-

gang housing describes the following

working steps:

• Lock the module on the mounting

frame.

• Plug in the connection cable.

• Place terminating resistors.

Terminating resistor

From the 2-gang surface-mounted housing

up, there are always two terminating

resistors included.

The terminating resistors are always

connected to the first and last module on

the system cable.

10864530 40/16

System 106 camera

module

5561 000

Operating instructions

Produktspecifikationer

Varumärke:	Gira
Kategori:	Intercomsystem
Modell:	5561000
Produkttyp:	Kameramodul
Färg på produkten:	Zwart
Vikt:	6600 g
Bredd:	100 mm
Djup:	230 mm
Höjd:	275 mm
LED-indikatorer:	Stroom
Vormfaktor:	Compact
Antal USB 2.0-portar:	1
Antal Ethernet LAN (RJ-45)-portar:	1
Gränssnitt:	USB
Material:	Glass, Metal
Respons tid:	4 ms
Uteffekt:	540 W
Strömspänningsskydd:	Over power, Over voltage, Overload, Short circuit
Frekvens:	50/60 Hz
Kompatibla operativsystem:	Windows 7/Vista/XP/2000/Server 2003, Linux
Drifttemperaturens omfång:	32 - 104 °F
Modem (RJ-11) port:	1
Betraktningsvinkel:	100 °
Drifttemperatur (TT):	0 - 40 °C
Type beeldscherm:	LCD
Harmoniserad systemkod (HS):	85078000
Antal AC-utgångar:	6 AC-uitgang(en)
Nominell inspänning:	165-265 V
Vågskyddsfunktioner:	Fax, Modem
Uteffektkapacitet:	0.9 kVA
Nätspänning, i drift:	230 V
Spänningsskydd:	Ja
Lämplig för land/platsanvändning:	Europa
Produktens färg:	Svart
Temperatur vid drift:	-25 - 70 ° C
Monteringssätt:	Yta
Brand kompatibilitet:	GIRA