Honeywell RLV430 Bruksanvisning
Läs gratis den bruksanvisning för Honeywell RLV430 (4 sidor) i kategorin Termostat. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 14.5 recensioner. Har du en fråga om Honeywell RLV430 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
RLV430 69-1855-1 2008-01-29 1/4
The RLV430 thermostat can be used to control an electric heating
system such as a baseboard heater, a radiant floor, a radiant ceiling,
a convector or a fan-forced heater.
The thermostat cannot be used with the following:
• a resistive load under 2 A
• a resistive load over 14.6 A
• systems driven by a contactor or a relay (inductive load)
• central heating systems
SUPPLIED PARTS
• One (1) thermostat
• Two (2) 6-32 mounting screws
• Two (2) solderless connectors
TURN OFF POWER TO THE HEATING SYSTEM AT THE MAIN
POWER PANEL TO AVOID ELECTRICAL SHOCK.
All cables and connections must comply with local electrical
codes.
This thermostat has tinned copper wires for line and load con-
nections. Special CO/ALR solderless connectors must be used if
these wires will be connected to aluminium conductors.
Install the thermostat onto an electrical box.
Install the thermostat about 5 feet high, on an inside wall facing
the heater.
Avoid locations where there are air drafts (such as the top of a
staircase or an air outlet), dead air spots (such as behind a
door), or direct sunlight.
Do not install the thermostat on a wall that conceals chimney or
stove pipes.
The thermostat wires are not polarized; either wire can be con-
nected to the load or to the power supply.
Connect the thermostat wires to the power and to the load using
solderless connectors for copper wires.
n
n
n
nn 1.
o
o
o
oo 2.
Up/Down buttons
Mode button
Day button
Hour button
Program button
Return button
Reset opening
Minute button
Period no. in
Automatic mode
Temperature
Heating power
indicator
Time and day
Manual
mode
Automatic
mode
Economy
mode
Setting no. in
Economy mode
Appears during
a power failure
Appears when the
setpoint is displayed
Flashes when the
clock has been reset
Appears if the
thermostat is configured
for a fan-forced heater
4-wire installation
2-wire installation
Produktspecifikationer
| Varumärke: | Honeywell |
| Kategori: | Termostat |
| Modell: | RLV430 |
Behöver du hjälp?
Om du behöver hjälp med Honeywell RLV430 ställ en fråga nedan och andra användare kommer att svara dig
Termostat Honeywell Manualer
29 Juni 2025
28 Juni 2025
28 Juni 2025
3 April 2025
11 Mars 2025
6 Februari 2025
28 Januari 2025
16 Januari 2025
Termostat Manualer
- Fenix
- Techno Line
- HQ
- Netatmo
- Otio
- Itho-Daalderop
- Brink
- Etherma
- Oertli
- Weishaupt
- ELKO
- AWB
- Braeburn
- MKC
Nyaste Termostat Manualer
13 Oktober 2025
12 Oktober 2025
12 Oktober 2025
5 Oktober 2025
2 Oktober 2025
2 Oktober 2025
29 September 2025
28 September 2025
28 September 2025
28 September 2025