IVT DSW-300 Bruksanvisning
IVT
ej kategoriserat
DSW-300
Läs gratis den bruksanvisning för IVT DSW-300 (6 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om IVT DSW-300 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
OPERATING INSTRUCTIONS
Digital sinus voltage converters 12V/24V
DSW _DSW- -300_DSW 600 - - - 1200_DSW 2000_DSW 2000S
Dear customer,
Thank you very much for the trust you have placed in us. You have acquired a reliable high quality product which will deliver -
good services for a long time if used appropriately.
Please read these instructions for use thoroughly and completely prior to putting it into operation. You receive important
information for safe operation and maintenance of the device.
The pack contains: Voltage converter, operating instructions
Intended use
The devices of the digital independent power supply of various sinus voltage converter series DSW serve for mobile and mains-
230V AC consumers from a 12V or 24V battery They are used to operate equipment such as TV and Sat systems, audio .
systems, tools, pumps, household appliances, compressors, chargers for mobile phones or laptops easily and flexibly.
The user must ensure that the device is protected against humidity and damp. Any other use than described before may
damage this device; in addition, improper use may result in serious hazards, such as short circuiting, fire, electrical shock etc.-
The entire product must not be modified or converted and the housing must not be opened in any manner whatsoever!
Safety instructions
Dear customer,
The following safety notes and hazard warnings serve not only for the protection of the device but also for the
protection of your health. Please read the following points thoroughly.
In case of property damage or personal injuries caused by improper handling or non-observance of these operating
instructions or the safety notes stated herein, the warrant/guarantee expires. We assume no liability for any
consequential damages.
General
• For safety and technical approval reasons (CE), the unauthorized conversion and/or modification of the
product is not permitted.
• - The voltage converter provides an output of 230V AC. Even in switched off condition charged condensers
may still produce 230V AC at the output for a short time.
• This device is no toy and must not be used by children! Please ensure childproof operation and storage of
the device at any time.
• Maintenance, installation or repair works may only be performed by an expert/qualified workshop. Use only
original spare parts for repair work. The use of any other spare parts may lead to serious damage to
property and personal injury!
The interior of the device does not contain any prod which must be adjusteduct components or maintained
by you.
• Don’t leave packaging material heedlessly. It could become a hazardous toy for children!
• Handle the product with care; impacts, shocks or even a fall from a low height may cause damage. In this
case have the voltage converter checked by a qualified expert before restart.
• If you detect damages, stop operating the device. Bring it to a qualified workshop or dispose of it in an
environmentally compatible manner.
Operation
• The product may only be operated in a dry environment. It may not get humid or wet, otherwise there is a
risk of life- threatening electrical shocks.
• The use of the product under unfavorable environmental conditions must be avoided under all
circumstances. Unfavorable environmental conditions include: ambient temperatures above 50°C,
flammable gases, solvents, vapours, dust, relative humidity in excess of 80%, and moisture.
• The device may not be operated or charged in the presence of flammable materials or gases. Explosion
hazard!
• Ensure proper ventilation during the operational phase, never cover the voltage converter and connected
devices.
• - Protect the voltage converter against electro magnetic fields as well as impacts and vibrations.
• Protect the voltage converter against heat! Should the voltage converter become too hot due to high
ambient temperatures, the overheat protection switches the device off to avoid consequential damage. In
this case, wait until the device has cooled down.
• Avoid sudden differences in temperature! This may cause the formation of condensation water in the
voltage converter! In this case, the voltage converter must be adjusted to the new ambient temperature
before start at a well ventilated place for a least one hour.
• Keep the voltage converter away from ignition sources or ope Explosion hazard!n fire!
• Operate fluorescent tubes only in conjunction with this voltage converter if they are equipped with an
electronic starter or electronic ballast. Using conventional starters may lead to severe damage of the
voltage converter.
• AC outputs of several power sources may not be connected in parallel! Do not connect AC generators or
mains voltage to the AC output of the voltage converter. This leads to the immediate destruction of the
voltage converter!
• Never open the voltage converter! Even after disconnecting the device from the battery there may be
hazardous voltages in the interior of the device. This is why service and repairs may only be carried out by
authorized and qualified personnel.
Warning: Improper assembly may cause hazardous contact voltages even on the closed device!
Notes on the battery
• If used improperly, lead batteries are a high risk for humans, animals and the environment. Always
observe the safety instructions of the battery manufacturer!
• Lead batteries contain aggressive corrosive acids. Avoid eye and skin contact with liquids from the battery!
Never disassemble lead batteries! Wash the parts of the skin affected thoroughly with water and soap. If
acid enters the eye, immediately flood the eye with running, clear and cool water! Then seek medical help
immediately! If acid contacts your clothing, wash immediately with soap and water!
Operation and display elements
1. Connection terminals 12V/24V DC input
2. Switch without configuration
3. On/Off switch, standby function
4. Switch for addresses, assignment for remote control FB-
02 or FB-03
5. Switch for addresses, assignment for remote control FB-
02 or FB-03
6. - -Connector for remote control FB 02 or FB 03
7. 01 Connector for remote control FB-
8. On/Off switch
9. LED control indicator for DC input
10. LED control indicator for AC output
11. USB output
12. output 230V AC
LED indicators
The LED control indicators 9 (DC input) and 10 (AC output) provide important information on the operating status of your
converter. Both LEDs work independently from one another. I.e., a failure in the DC input area has direct impact on the function
of the AC output; or a failure in the output area affects the input function directly.
Operating status/ fault indicators
LED 9 (DC input)
LED 10 (AC output)
Device is switched on and ready for operation
LED is on (green)
LED is on (green)
Early warning for deep discharge protection
Slow blinking (green)
LED is on (green)
Cut-off due to deep discharge protection
Fast blinking (green)
Fast blinking (green)
Input overvoltage
Fast blinking (green)
Fast blinking (green)
Output short-circuit or overload
Fast blinking (green)
Fast blinking (green)
Description of functions
The voltage converters of the DSW series are modern, microprocessor-controlled devices which were developed for mobile
power supply. The voltage converters of the DSW eries convert lower DC input voltage into higher AC output voltage and thus s
allow for the usage of conventional 230V AC consumers on the road.
These devices offer real sinus alternating voltage which allows for a trouble free operation also of difficult consumers such as -
PCs, TV systems and devices with transformers.
Of course, all devices of the DWS sinus voltage converter series are equipped with all necessary safety features which
correspond to a state art product.-of the- -
Features:
• Real 230V AC 50Hz sinus output voltage
• Galvanically isolated
• High efficiency
• Precise 50Hz frequency
• Standby function
• - - Output and temperature controlled fan
• Soft start function for consumers with high starting current
• Various remote controls as accessories available
• Overvoltage shutdown
• Adjustable, dynamic deep discharge protection
• Overload management
• - Short circuit shutdown
• Reverse polarity protection
• - Temperature activated protective circuit
Connection
For connecting the DC line, please use cable as short as possible with sufficient cross section and ensure good contact, both to -
the battery and to the voltage converter.
To thin or loose connectors may cause fire due to overheating!
• Switch 8 on the front of the device must be set to “Off”.
• - A high current fuse must be installed directly at the battery. If this fuse is missing, there is a risk of fire in case of
short-circuit of the two connection cables.
• Now connect both connection cables to the battery (positive pole = red; negative pole = black.)
Attention! The charge of the big capacitors may cause a spark inside the voltage converter when the fuse is connected. This is
perfectly harmless.
Recommended minimum cable cross sections for connection cables -
The recommended minimum cable cross-section for connection cables depends on the input voltage and the length of the used
cable.
Model No.
Cable length up to
2 m
Cable length up to
3 m
DSW-300
16 mm²
16 mm²
DSW-600
16 mm²
16 mm²
DSW-1200
25 mm²
35 mm²
DSW-2000
35 mm²
50 mm²
DSW-2000S
35 mm²
50 mm²
Ininitial operation
In order to guarantee appropriate initial operation, please read these operating instructions including safety
information completely and carefully before use.
Check the voltage converter before every start on possible damages. In case of damages, don’t start operation but contact an
authorized expert or our service.
Always ensure appropriate ventilation of your voltage converter. Never cover the ventilation slots of the voltage converter. Never
use the device in the vicinity of highly flammable materials.
Set up the voltage converter in such a way that may not fall over or down.it
During assembly ensure that the voltage converter is mounted in such a way that it is not accessible for children. Danger of life!
Check the voltage requirements of the consumers to be connected. Connect only consumers whose voltage specifications and
output correspond with those of the voltage converter. Do not connect defect or damaged consumers.
Operation
To switch the voltage converter on and off activate the on/off switch 8. Now you may connect your 230V AC consumer. The
sequence of switching on/off and connecting the consumers is reversible.
Note: When you switch off the voltage converter using on/off switch 8 or the remote control FB-01, no own power is required.
When y 02 or FB 03 for this purpose, however, you only switch off the 230 V AC output with it, but ou use the remote control FB- -
not the voltage converter. This is why it continues to require own power. To save energy, we recommend using switch 8 or the
remote con 01 only for switching off.trol FB-
General notes on using AC consumers on voltage converters
In principle, all AC consumers may be operated on a sinus voltage converter. Observe, however, that for doing so you are
always restricted by the availability of the battery capacity and the output requirements of the individual AC consumers. For a
better assessment of the battery reserve, we recommend to familiarize yourself with some relevant characteristics of AC
consumers.
One important factor is own power. Most consumers require a significantly higher starting current than indicated on the type the
plate of the device. E.g. bulbs require starting current which is up to 8 times higher for approx. 1sec; refrigerators and TV
systems require starting current which is up to 10 times higher for 3 sec resp. approx. 1sec. This is why it is necessary when
choosing the voltage converter to ensure that corresponding output capacity is available. Therefore, a voltage converter must
provide a continuous output of 500 W (50 W x 10) to operate a small refrigerator with a continuous output of 50 W.
Produktspecifikationer
| Varumärke: | IVT |
| Kategori: | ej kategoriserat |
| Modell: | DSW-300 |
Behöver du hjälp?
Om du behöver hjälp med IVT DSW-300 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat IVT Manualer
7 Juli 2025
7 Juli 2025
ej kategoriserat Manualer
- Vivo
- Werkstein
- Ryobi
- Netgear
- AXIL
- Infinity
- Mestic
- Taga Harmony
- Mount-It!
- Carson
- Motorola
- Dual
- Rockville
- Denon
- Rane
Nyaste ej kategoriserat Manualer
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025