Kuzco Chute MP14850 Bruksanvisning

Läs gratis den bruksanvisning för Kuzco Chute MP14850 (1 sidor) i kategorin Lampa. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 7 recensioner. Har du en fråga om Kuzco Chute MP14850 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

INSTALLATION SHEET

MP14850

Ceiling LED Multi Pendant

START FROM HERE

1a.

1b.

1c.

1f.

1d.

1h.

1e.

19054 28th Avenue Surrey, BC Canada V3Z 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

2c.

2g.

2a.

Please Note:

• This Kuzco LED fixtures come with pre-wired LED module(s)

• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary

contact with the module could cause permanent damage

• Use ELV (Electronic Low Voltage) or TRIAC type of dimmer for dimming application

• Make sure is POWERCOMPLETELY OFF at the fuse box

• Have your fixture installed by a qualified licensed electrician

• Prepare everything in a clear area

• Wear gloves at all time during this installation

• Read instructions carefully before you start assembly

• Keep this installation sheet for future reference

Technical Support: 1-855-855-8926

20190618

1. Remove fixture from its original package

2. Separate mounting plate from canopy by (1c)(2a)

removing decorative nuts (2c)

3. Align mounting plate screws to desired (1d)

orientation, and then attach mounting plate to (1c)

electrical junction box using screws provided (1a)

(1e) in hardware package

4. Secure mounting plate to mounting surface (1c)

with anchors and screws (1f)(1h)

5. Make proper electrical connections (black to hot

“L”, white to neutral “N”, ground to “GND”) with

wire nuts provided in hardware package(1b)

6. Align and insert mounting plate screws (1d)

through holes on canopy , secure with (2a)

decorative nuts (2c)

7. Fine tone wire length if necessary, by push and

hold wire gripper and then adjust wire to (2g)

desired length

Produktspecifikationer