Kuzco Essex FM43916 Bruksanvisning

Läs gratis den bruksanvisning för Kuzco Essex FM43916 (1 sidor) i kategorin Lampa. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 3 recensioner. Har du en fråga om Kuzco Essex FM43916 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

INSTALLATION SHEET

LED Flush Mount

START FROM HERE

.

19054 28th Avenue Surrey, BC Canada V3Z 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

20210406

FM43916

1. Remove fixture from its original package

2. Attach crossbar to electrical junction box (1c)(1a)

using screws provided in hardware package(1e)

3. Make proper electrical connections ( to “L”, blackhot

white to “N”, to with wire nuts neutralground“GND”)

(1b) provided in hardware package

4. Install Pan-Head Crossbar Mounting Screws (1d)

halfway into threaded holes on crossbar . Align (1c)

keyholes on backplate and module to Pan-Head (2a)

Crossbar Mounting Screws heads, insert and turn, (1d)

and then secure with screw driver.

5. Secure backplate to ceiling with additional screws (2a)

(1g) and anchors if necessary(1f)

6. Twist shade onto backplate to secure(3a)(2a)

1a.

1b.

1c.

1e.

1d.

1f.

2a.

1g.

3a.

• Make sure is POWERCOMPLETELY OFF at the fuse box

• Have your fixture installed by a qualified licensed electrician

• Prepare everything in a clear area

• Wear gloves at all times during this installation

• Read instructions carefully before you start assembly

• Keep this installation sheet for future reference

Technical Support: 1-855-855-8926

Please Note:

• This Kuzco LED fixture comes with pre-wired LED module(s)

• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary

contact with the module could cause permanent damage

• For dimming, an ELV (Electronic Low Voltage) type of dimmer is required

• 120V input

Produktspecifikationer