Robert Abbey 2257 Bruksanvisning

Läs gratis den bruksanvisning för Robert Abbey 2257 (1 sidor) i kategorin Lampa. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 3 recensioner. Har du en fråga om Robert Abbey 2257 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

2257

ASSEMBLY INSTRUCTIONS FOR YOUR

LOGAN BUFFET TABLE LAMP

(A)

(G)

(F)

(E)

(B)

(D)

(C)

ASSEMBLY INSTRUCTIONS:

NOTE: Do not connect electricity until lamp is fully assembled.

1. Remove lamp parts from packaging. Do not throw away any parts.

2. Place lamp base on level surface.

3. Remove finial (A) from harp (C). Squeeze harp (C) inward and place into the opening of saddle (D).

4. Place shade (B) onto harp (C). Thread fi nial (A) back onto harp (C) to secure shade (B) to lamp.

5. Install one 60W max. B10.5, Candelabra base bulb into socket.

6. Remove protective plastic (G) from polarized plug (F).

7. Insert polarized plug (F) into wall outlet.

8. Use switch (E) to control power to lamp.

* To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners.*

IMPORTANT SAFETY INSTRUCTIONS:

* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This

plug will fit in a polarized outlet only one way. If it does not fit fully in the outlet, reverse the plug. If it still does not fit,

contact a qualified electrician. Do NOT alter the plug.

* Do not use with an extension cord unless the plug from the lamp can be fully inserted into the extension cord receptical.

* Switch power o and remove plug from the wall outlet before replacing the bulb.

Produktspecifikationer