Robert Abbey CL990 Bruksanvisning

Läs gratis den bruksanvisning för Robert Abbey CL990 (1 sidor) i kategorin Lampa. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 4 recensioner. Har du en fråga om Robert Abbey CL990 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

ASSEMBLY INSTRUCTIONS:

NOTE: Do not connect electricity until lamp is fully assembled.

1. Remove lamp parts from packaging. Do not throw away any parts.

2. Place lamp base on level surface.

3. Remove nial (A) from harp (C). Squeeze harp (C) inward and place into the opening of saddle (D).

4. Place shade (B) onto harp (C). Thread nial (A) back onto harp (C) to secure shade (B) to lamp.

5. Install one 60W max. G16.5, candelabra base bulb into the socket.

6. Remove protective plastic from polarized plug (E).

7. Insert polarized plug (E) into wall outlet.

* To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners.*

IMPORTANT SAFETY INSTRUCTIONS:

* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This

plug will t in a polarized outlet only one way. If it does not t fully in the outlet, reverse the plug. If it still does not t,

contact a qualied electrician. Do NOT alter the plug.

* Do not use with an extension cord unless the plug from the lamp can be fully inserted into the extension cord receptical.

* Switch power off and remove plug from the wall outlet before replacing the bulb.

(E)

(B)

(A)

(C)

(D)

ASSEMBLY INSTRUCTIONS FOR YOUR

HARVEY ACCENT LAMP

990

Produktspecifikationer