Kuzco Cirque PD82524 Bruksanvisning


Sidor 1 Lampa

Läs bruksanvisningen för Kuzco Cirque PD82524 gratis online eller ladda ner PDF:en. 11 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga

INSTALLATION SHEET
PD82524
Ceiling LED Pendant
START FROM HERE
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W
20191113
: kuzcolighting.com
• This Kuzco LED fixtures come with pre-wired LED module(s)
• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary
contact with the module could cause permanent damage
• Use ELV (Electronic Low Voltage) or TRIAC type of dimmer for dimming application
• Make sure is POWERCOMPLETELY OFF at the fuse box
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all time during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
1. Remove fixture from its original package
2. Separate mounting plate from canopy by (1c)(2a)
removing canopy screws (2f)
3. Attach mounting plate to electrical junction box (1c)(1a)
using screws provided in hardware package(1e)
4. Determine hanging height of fixture by securing rods (2d)
5. Secure mounting plate to mounting surface with(1c)
anchors and screws (1f)(1h)
6. Make proper electrical connections (black to hot “L”, white
to neutral “N”, ground to “GND”) with wire nuts (1b)
provided in hardware package
7. Attach canopy to mounting plate with canopy (2a)(1c)
screws (2f)
2d.
1a.
2a.
1b.
1c.
1e.
2f.
1f.
1h.

Betygsätt denna manual


Produktspecifikationer

Varumärke: Kuzco
Kategori: Lampa
Modell: Cirque PD82524

Behöver du hjälp?

Om du behöver hjälp med Kuzco Cirque PD82524 ställ en fråga nedan och andra användare kommer att svara dig