Liftmaster 374UT Bruksanvisning

Läs gratis den bruksanvisning för Liftmaster 374UT (16 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 7 recensioner. Har du en fråga om Liftmaster 374UT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/16
To prevent possible SERIOUS INJURY or DEATH from a moving gate or door:
• ALWAYSkeepremotecontrolsoutofreachofchildren.NEVERpermitchildrentooperate,orplaywithremotecontrol
transmitters.
• ActivategateordoorONLYwhenitcanbeseenclearly,isproperlyadjustedandtherearenoobstructionstodoortravel.
• ALWAYSkeepgateordoorinsightuntilcompletelyclosed.NEVERpermitanyonetocrosspathofmovinggateordoor.
Universal Mini Remote Control
Read instructions thoroughly BEFORE beginning.
If using the Universal Mini Remote Control with residential door openers, the remote control must be used only
with door openers manufactured after 1993 that utilize photoelectric sensors. The photoelectric sensors are
always located on or near the bottom of the door track.
STOP
MODEL 374UT
TABLE OF CONTENTS
GETTING STARTED .................................................... 2
LOCATE THE PROGRAM/LEARN BUTTON ........................3-7
Chamberlain® products ............................................. 3
Genie® products ..................................................... 4
Linear® products ..................................................... 5
Wayne Dalton® products ........................................... 5
LiftMaster® products ................................................ 6
Overhead Door®
products .......................................... 6
Stanley®
products ................................................... 7
GARAGE DOOR OPENERS ..........................................8-9
Programming to a garage door opener with a
Program/LEARN button ............................................. 8
Programming to a Genie® Intellicode® 2
garage door opener ................................................. 9
Programming to a LiftMaster garage door opener using
the LEARN button on the control panel ......................... 10
COMMERCIAL DOOR OPERATORS .................................11
Programming to a commercial door operator
with a RADIO button................................................11
GATE OPERATORS ....................................................12
Program to a gate operator
with a Program/LEARN button ....................................12
EXTERNAL RECEIVERS ...............................................13
Programming to an external receiver
with a Program/LEARN button ....................................13
MYQ® LIGHT CONTROLS ............................................14
Programming to a MyQ® Light Control ..........................14
NEED HELP? ...........................................................15
BATTERY 16 ...............................................................
2
gETTing STaRTED
The Universal Mini Remote Control can be programmed to activate up to two products, such as a garage door opener, MyQ® light
control, gate operator, or commercial door operator. Each button on the remote control works independently of the other and must
be programmed separately. The images throughout this manual are for reference only and your product may look different.
Bottom Button
Garage Door Opener Commercial Door OperatorGate Operator
LED
You will need to locate the Program/LEARN button on your product before you start programming.
GARAGE DOOR OPENERS
TheProgram/LEARNbuttonistypicallylocatedonthebackorsidepanel
ofyourgaragedooropener.YourProgram/LEARNbuttonmayhavea
differentname(SMARTbutton,SETbutton,etc.).Forhelplocatingyour
Program/LEARNbuttonrefertotheTableofContentsinthismanualor
contactyourgaragedooropenermanufacturer.
COMMERCIAL DOOR OPERATORS
TheRADIObuttonistypicallylocatedonthelogicboardofyouroperator.
ForhelplocatingyourRADIObuttoncontactyourdooroperator
manufacturer.
GATE OPERATORS
TheProgram/LEARNbuttonistypicallylocatedonthecontrolboardof
youroperator.YourProgram/LEARNbuttonmayhaveadifferentname
(RADIObutton,XMITTERbutton,etc.).ForhelplocatingyourProgram/
LEARNbuttoncontactyourgateoperatormanufacturer.
EXTERNAL RECEIVER
Someproductsdonot
haveaProgram/LEARN
button.Inthiscase,the
Program/LEARNbutton
willbelocatedinan
externalreceiver.The
receiverwillbelocatedon
theproductormounted
nearby.Followthe
programminginstructions
foranexternalreceiver.
3
LOCaTE ThE PROgRaM/LEaRn BUTTOn
ChaMBERLain PRODUCTS

Produktspecifikationer

Varumärke: Liftmaster
Kategori: Inte kategoriserad
Modell: 374UT

Behöver du hjälp?

Om du behöver hjälp med Liftmaster 374UT ställ en fråga nedan och andra användare kommer att svara dig