Liftmaster 50-HERK2 Bruksanvisning

Liftmaster Inte kategoriserad 50-HERK2

Läs gratis den bruksanvisning för Liftmaster 50-HERK2 (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 6 recensioner. Har du en fråga om Liftmaster 50-HERK2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/8

Failure to follow these safety precautions may cause DAMAGE to

sensor or objects, SERIOUS PERSONAL INJURY, or DEATH.

• This product is designed to be mounted above an overhead

commercial door.

• DO NOT use this product other than for its specified application.

• Observe ALL applicable local, national, and international door safety

standards, codes, and laws.

• ONLY trained and qualified personnel may install and initialize the

sensor.

• ONLY authorized factory personnel may perform hardware/software

changes or repairs to the product.

• The sensor should ONLY be operated from a safety extra low

voltage (SELV) system with safe electrical separation.

• ALWAYS consider the safety functions of your applications as a

whole, NEVER just in relation to one individual section of the

system.

• The installer is responsible for testing the system to ensure it

meets ALL applicable safety standards (e.g. UL 325).

• NEVER touch ANY electronic components or lenses.

• After accessing the inside of the sensor, ensure the cover/

protection seal is closed tightly to achieve designated protection

rating.

• ENSURE the commercial door operator has ALL of its monitored

entrapment protection devices installed and operational. This

sensor does NOT replace any entrapment protection devices.

MICROWAVE MOTION SENSOR

for Commercial Doors

MODEL 50-HERK2

INTRODUCTION

The 50-HERK2 is an advanced planar microwave motion sensor designed

for commercial doors and gates. The sensor can differentiate between

people and vehicles. Its two relay outputs can be programmed

independently for a multitude of applications. Additional features include

cross-traffic optimization and slow-motion detection.

CARTON INVENTORY

• 50-HERK2 sensor with pre-wired 23' (7 m) 6-wire cable

• Self-adhesive mounting template

• Instructions

TOOLS AND HARDWARE NEEDED

• Ladder

• Tape measure

• Level

• Drill with 3/16" or 5 mm bit

• 3/16" or 5 mm mounting screws (2)

• Screwdriver

• 4 AWG (5 mm diameter) wire stripper for cable sleeve

• 24 AWG (0.5 mm diameter) wire stripper for single wires

Other items recommended for installation:

• Remote control (Model 50-HERK-RC2)

OVERVIEW

Aluminum housing

Mounting bracket

Inclination angle

hand-screws (2)

Microwave planar module

Clip for wide ﬁeld sensing Left button

Right button

Output 1 indicator (green LED)

Output 2 indicator (red LED)

DIP switches

Cable

Front cover

Cover screws (4)

50-HERK-RC2 remote control (not provided)

Required to access complete set of functions

for remote setup and operation

Produktspecifikationer

Varumärke:	Liftmaster
Kategori:	Inte kategoriserad
Modell:	50-HERK2
Färg på produkten:	Zwart
Vikt:	43000 g
Bredd:	1471 mm
Djup:	131 mm
Höjd:	898 mm
Förpackningens vikt:	50000 g
Förpackningens bredd:	1574 mm
Djuppackning:	203 mm
Förpackningshöjd:	1092 mm
Monteringsverktyg:	Ja
Monteringsmetod:	Muur
Maximal viktkapacitet:	34 kg
Modell:	Landschap
Hållbarhetscertifikat:	RoHS
Antal per paket:	1 stuk(s)
Kompatibilitet med monteringsgränssnitt (min):	200 x 200 mm
Kompatibilitet med monteringsgränssnitt (max):	600 x 400 mm
Antal skärmar som stöds:	1
Maximal skärmstorlek:	49 "