Liftmaster 881LMW Bruksanvisning

Liftmaster Inte kategoriserad 881LMW

Läs gratis den bruksanvisning för Liftmaster 881LMW (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 10 recensioner. Har du en fråga om Liftmaster 881LMW eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/4

INSTALLATION

To insert or release

wire, push in tab with

screwdriver tip.

7/16"

(11 mm)

7/16"

(11 mm)

5 feet (1.5 m)

minimum

GANG BOX

DRYWALL

6ABx1-1/4" Drywall Anchors

6-32x1"

PROGRAM

Unplug the garage door opener. Disconnect the battery (if applicable).

1. Connect the wires to the back of the door control.

2. Secure the door control to the wall.

3. Connect the wires to the garage door opener.

Plug in the garage door opener and reconnect the battery. The command LED on the

door control will blink if installed correctly. To synchronize the garage door opener and

the door control, press the push bar up to 3 times, until the garage door opener

activates.

RED

WHITE

To prevent possible SERIOUS INJURY or DEATH from

electrocution:

• Be sure power is NOT connected BEFORE installing door

control.

• Connect ONLY to 12 VOLT low voltage wires.

To prevent possible SERIOUS INJURY or DEATH from a closing

garage door:

• Install door control within sight of garage door, out of reach of

children at a minimum height of 5 feet (1.5 m), and away from

ALL moving parts of door.

• NEVER permit children to operate or play with door control

push buttons or remote control transmitters.

• Activate door ONLY when it can be seen clearly, is properly

adjusted, and there are no obstructions to door travel.

• ALWAYS keep garage door in sight until completely closed.

NEVER permit anyone to cross path of closing garage door.

• Unattended devices and features are to be used ONLY with

sectional doors.

MULTI-FUNCTION CONTROL PANEL

(SECURITY+ 2.0®) MODEL 882LMW

AND

PREMIUM MOTION-DETECTING

CONTROL PANEL MODELS 881LMW AND 886LMW

For use with Security+ 2.0® Garage Door Openers, Wi-Fi® enabled

Security+ 2.0® Garage Door Openers (indicated by the Wi-Fi logo on

the garage door opener cover) and MyQ® accessories.

UNATTENDED OPERATION

The Timer-to-Close (TTC) feature, the MyQ

® Smartphone Control app,

and MyQ® Garage Door and Gate Monitor are examples of unattended

close and are to be used ONLY with sectional doors. Any device or

feature that allows the door to close without being in the line of sight

of the door is considered unattended close. The Timer-to-Close (TTC)

feature, the MyQ® Smartphone Control, and any other MyQ® devices

are to be used ONLY with sectional doors.

Model 882LMW

Models 881LMW and 886LMW

REMOTE CONTROL

1. Press the LEARN button on the

door control . The twice

Command LED will blink.

2. Press and release the button on

the remote control that you wish

to operate your garage door.

The garage door opener lights will

flash (or two clicks will be heard)

and the Command LED will stop

blinking when the code has been

programmed.

? ? ? ?

KEYLESS ENTRY

1. Press the LEARN button on the door

control twice. The Command LED will

blink.

2. Enter a 4-digit personal identification

number (PIN) on the keypad. Then

press the ENTER button.

The garage door opener lights will flash (or

two clicks will be heard) and the Command

LED will stop blinking when the code has

been programmed.

1. Lift the push bar on the door control. Press and release the LEARN

button. The garage door opener will beep once and the command LED

on the door control will blink to indicate Wi-Fi learn mode. You have 20

minutes to complete the connection process.

2. On your mobile device, go to Settings > Wi-Fi and select the network

with the “MyQ-” preﬁ x.

3. Launch the web browser on your smartphone or tablet. Enter setup.myqdevice.com

into the browser address bar. Follow the on screen prompts to connect the garage

door opener to your Wi-Fi network. The MyQ serial number will display on screen.

Write the serial number in the space below.

4. Download the MyQ app from the App Store® or Google Play™ store. Sign up for your

MyQ account and add the MyQ serial number to your account.

If you are unsuccessful adding your device, try an alternate web browser or visit

WiFiHelp.LiftMaster.com.

CONNECT YOUR GARAGE DOOR OPENER TO YOUR HOME WI-FI®

NETWORK

(for Wi-Fi garage door openers ONLY)

Command LED

Model

882LMW

Models 881LMW

and 886LMW

WARNING: This product can expose you to chemicals

including lead, which are known to the State of California to

cause cancer or birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov

Produktspecifikationer

Varumärke:	Liftmaster
Kategori:	Inte kategoriserad
Modell:	881LMW
Färg på produkten:	Zwart
Vikt:	280 g
Bredd:	146 mm
Djup:	76 mm
Höjd:	30 mm
Snäll:	AV-zender
Användarmanual:	Ja
Nuvarande:	2 A
Anslutningsteknik:	Bedraad
Maximal upplösning:	1920 x 1080 Pixels
Inkluderar AC-adapter:	Ja
Maximal uppdateringshastighet:	60 Hz
Anslutning för nätadapter:	Ja
Hållbarhetscertifikat:	RoHS
Antal per paket:	1 stuk(s)
Förvaringstemperatur:	-10 - 60 °C
Förvaringsfuktighet:	10 - 90 procent
Överensstämmelse med hållbarhet:	Ja
DVI-utgångar:	1
Driftspänning:	5 V
Drifttemperatur (TT):	0 - 50 °C
Relativ luftfuktighet i drift (VV):	10 - 90 procent