Metra 99-3527 Bruksanvisning
Metra
Inte kategoriserad
99-3527
Läs gratis den bruksanvisning för Metra 99-3527 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 7.5 recensioner. Har du en fråga om Metra 99-3527 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
METRA. The World’s best kits.™metraonline.com © COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
REV. 3/9/2016 INST99-3527
Installation instructions for part 99-3527
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• A) Radio housing • B) Trim plate • C) ISO brackets
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • GMOS-01 • GMOS-04
Antenna Adapter: • 40-GM10
• Phillips screwdriver • Panel removal tool • 9/32” socket wrench
TOOLS REQUIRED
Pontiac Grand Prix 2004-2008
99-3527
A B C
Dash Disassembly ..................................................2
Kit Assembly
– DIN radio provision with pocket ............................ 3
– ISO DIN radio provision with pocket ...................... 3
Table of Contents
99-3527
2
1. Remove the bezel from around
the key cylinder. (Figure A)
2. Unclip and remove the entire
panel surrounding the radio,
including the
message center
and the vents. (Figure B)
3. To remove the radio, start at
bottom of the stack and remove
(8) 9/32” screws from the pocket,
climate control, and the radio.
(Figure C)
Continue to kit assembly
Dash Disassembly
(Figure B) (Figure C)
(Figure A)
99-3527
Kit Assembly
(Figure A) (Figure A)
(Figure B) (Figure B)
DIN radio provision with pocket
1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Slide the sleeve into the radio
housing and secure by bending the
metal locking tabs down
. (Figure A)
3. Slide the radio back into the sleeve
until it clicks in. (Figure B)
4.
Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio and climate
controls. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Test the radio for
proper operation
.
5. Reassemble the dash in reverse
order of disassembly.
ISO DIN radio provision with pocket
1.
Remove the metal DIN sleeve and
trim ring from the aftermarket radio
2.
Secure the to the ISO brackets
radio with the screws supplied with
the radio. (Figure A)
3.
Slide the radio into the radio
housing until the side clips engage.
(Figure B)
4.
Snap the into the trim plate radio
housing. (Figure B)
5.
Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio and climate
controls. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Test the radio for
proper operation
.
6. Reassemble the dash in reverse
order of disassembly.
3
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Inte kategoriserad |
| Modell: | 99-3527 |
Behöver du hjälp?
Om du behöver hjälp med Metra 99-3527 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Metra Manualer
3 April 2025
3 April 2025
3 April 2025
12 Mars 2025
24 Februari 2025
24 Februari 2025
14 Januari 2025
14 Januari 2025
2 Januari 2025
2 Januari 2025
Inte kategoriserad Manualer
- Flex
- M-Audio
- AudioQuest
- Subaru
- Asetek
- HomePilot
- Betty Bossi
- Master
- Valueline
- Henry Engineering
- Nolte
- Potenza
- NAD
- Forza
- ActiveJet
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025