Mikrotik CRS520-4XS-16XQ-RM Bruksanvisning

Mikrotik brytare CRS520-4XS-16XQ-RM

Läs gratis den bruksanvisning för Mikrotik CRS520-4XS-16XQ-RM (3 sidor) i kategorin brytare. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 8.5 recensioner. Har du en fråga om Mikrotik CRS520-4XS-16XQ-RM eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

CRS520-4XS-16XQ-RM

CRS520-4XS-16XQ-RMCRS520-4XS-16XQ-RM

CRS520-4XS-16XQ-RM

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing

accidents.

Ultimate disposal of this product should be handled according to all national laws and regulations.

The Installation of the equipment must comply with local and national electrical codes.

This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the

correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.

This product is intended to be installed indoors. Keep this product away from water, fire, humidity or hot environments.

Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Read the installation instructions before connecting the system to the power source.

We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your

own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.

It is the customer's responsibility to follow local country regulations. All Mikrotik devices must be professionally installed.

This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take

adequate measures

Quick start

Connect with your computer to the device;

Connect the device to a power source;

Download the configuration tool ;https://mt.lv/WinBox

Start configuration within the chosen tool, using the default IP address 192.168.88.1. If the IP address is unavailable, use WinBox and choose the

"Neighbors" tab to find the device;

Proceed to connect using the MAC address. The username is "admin," and there is no password (or, for some models, check user and wireless