Nitecore HC50 Bruksanvisning

Nitecore Ficklampa HC50

Läs gratis den bruksanvisning för Nitecore HC50 (1 sidor) i kategorin Ficklampa. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 14.5 recensioner. Har du en fråga om Nitecore HC50 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

User Manual

Features

· Purpose-designed for hiking, climbing, camping and general outdoor recreation

· All metal high-performance dual-beam headlamp

· Aluminum “unibody” construction is highly rugged and provides excellent cooling

performance

· Utilizes a premium CREE XM-L2 (T6) LED

· Powered by a single 18650 lithium-ion battery for up to 565 lumens of output

· High-efficiency circuit provides up to 400 hours of runtime

· A custom catoptrics-based system produces an extremely wide 100° beam angle

· Light housing provides 90° vertical movement to eliminate illumination dead-zones

· Direct access to red light mode with a runtime of up to 145 hours

· Innovative single button two-stage switch is remarkably user-friendly (patented)

· Ten rapidly switchable brightness modes to select from

· Integrated red/green power indicator light displays remaining battery power (patented)

· Power indicator secondary function displays battery voltage accurate to 0.1V

· Integrated temperature sensor and intelligent temperature control ensure stable and safe

use

· High-efficiency regulation circuit provides unwavering output

· Toughened ultra-clear mineral glass with anti-reflective coating

· Constructed from aero-grade aluminum alloy

· Rugged HAIII military grade hard-anodized

· Comfortable chafe-free and breathable nylon headband

· Waterproof in accordance with IPX-8 (two meters submersible)

· Impact resistant to 1.5 meters

· Tail stand capability

Dimensions

Length: 86mm (3.39”)

Diameter: 32mm (1.26”)

Weight: 130g (4.59oz)(without battery)

Battery Options

Thanks for purchasing NITECORE!

The All-Round Flashlight Expert

TURBO HIGH MID LOW

LUMENS

300

LUMENS

760

LUMENS

140

LUMENS

h min15

h min30

LOWER

LUMENS

510

h min45

250

min

98m

(Beam Distance)

2 400cd ,

(Peak Beam Intensity)

IPX-8, 2m

(Waterproof AND Submersible)

1.5m

(Impact Resistant)

1×18650 2×CR123

HC50

Battery Installation

1. Insert batteries with the positive (+) and negative (-) ends corresponding to the diagram

below.

2. Tighten the tail cap by aligning the two gold pins on the inside of the tail cap with the

corresponding holes on the flashlight body and rotate clockwise.

Each time a battery is inserted, the power indicator light will blink to indicate battery voltage.

Please refer to the “Power Tips” section of this manual for details.

WARNING

Ensure when turning the HC50 on, the beam is directed away from the eyes of people or

animals.

Accessories

Spare O-ring

NOTICE

The above data has been

measured in accordance

with the international

flashlight testing

standards ANSI/NEMA

FL1 using one x 3.7V

3400mAh Nitecore 18650

battery and 2 x 3V

1700mAh Nitecore CR123

batteries under laboratory

conditions. The data may

vary slightly during

real-world use due to

battery type, individual

usage habits and

environmental factors.

General Operation

The HC50 utilizes a 2-stage switch similar to a camera shutter button. The light’s numerous

functions are selected according to the depth the switch is pressed.

With the light turned off, fully press and release within a second to turn on. The brightness

level displayed will be the last level that was used. Repeat to turn off.

Brightness Selection

With the light turned on, press the switch half way down repeatedly to cycle through the

following output modes: ultra-low, low, medium, high and turbo. A given brightness level will

be memorized each time the light is turned off while that level is displayed.

NB:

1. Medium brightness is the default brightness level when loading a battery for the first time.

2. Every time the main white LED lamp is turned on, an integrated red / green light will

illuminate to indicate battery status. Please refer to the “Power Tips” section of this manual

for details.

Special Police Warning / SOS mode and Location Beacon

With the light turned on, fully press the switch twice in quick succession to turn on the police

warning mode. Half press the switch repeatedly to cycle through location beacon, SOS and

police warning modes. Fully press to exit special mode and turn the light off.

Red Light Illumination / Signal light

With the light turned off, press the switch all the way down and hold for more than one second

to enter into red light illumination mode (1.2 lumens).

When in red light mode, press the switch half way repeatedly to cycle through red light signal

mode and standard red light mode. Fully press the switch to turn the light off.

Power Tips

Whenever the main lamp (white LED) is switched on, a power indicator built into the switch

will either illuminate or blink green or red to indicate battery status.

1. When main light is turned on, the green power indicatior will illuminate for two seconds

when power levels are over 50%.

2. When main light is turned on, the red power indicatior will illuminate for two seconds when

power levels are below 50%.

3. With the main light turned on, the red power indicator will blink rapidly when power levels

are very low and the battery needs to be recharged and replaced.

4. Each time a new battery is inserted, the green power indicator light will blink in various

sequences to indicate battery voltage (accurate to ±0.1V). For example, when battery

voltage is at a maximum of 4.2V, the power indicator will blink 4 times in quick succession,

followed by a one second pause and then two more successive blinks, indicating a total

battery voltage of 4.2V.

ATR Technology

Advanced temperature regulation (ATR) technology allows HC50 to dynamically adjust output

performance based on its internal temperature. This prevents damage from overheating and

prolongs its working life.

Changing Batteries

When the power indicator blinks rapidly it means the batteries need to be replaced or

recharged. Alternatively if the light becomes dim or unresponsive this also indicates batteries

need to be replaced.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of

silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. Any defective / malfunctioning

NITECORE® product can be repaired free of charge for a period of 60 months (5 years) from

the date of purchase. Beyond 60 months (5 years), a limited warranty applies, covering the

cost of labor and maintenance, but not the cost of accessories or replacement parts.

The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please contact a local

NITECORE® distributor or send an email to service@nitecore.com

※All images, text and statements specified herein this user manual are for reference purpose

only. Should any discrepancy occurs between this manual and information specified on

www.nitecore.com, information on our official website shall prevail. Sysmax Industry Co., Ltd.

reserves the rights to interpret and amend the content of this document at any time without

prior notice.

TYPE

Nominal voltage

Compatible

Primary Lithium battery

CR123 3V

Y (Recommended)

18650 Rechargeable Li-ion battery

18650 3.7V

Y (Recommended)

Rechargeable Li-ion battery

RCR123 3.7V

Output & Runtime

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: info@nitecore.com

Web: www.nitecore.com

Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600

Please find us on facebook:

NITECORE Flashlights

20151118

Produktspecifikationer

Varumärke:	Nitecore
Kategori:	Ficklampa
Modell:	HC50
Vikt:	130 g
Bredd:	86 mm
Djup:	32 mm
Höjd:	32 mm
Antal lampor:	3 lamp(or)
Ljusstyrka:	2400 CD
Vattentät:	Ja
Certifiering:	CE
Vattentät upp till:	2 m
Lämplig för utomhusbruk:	Ja
Batteriteknik:	Litium
Justerbart pannband:	Ja
Antal batterier:	1
Produktens färg:	Svart
Antal per förpackning:	1 styck
Lamptyp:	LED
Material, hölje:	Gjuten aluminium
Antal spänningsnivåer:	5
Spridningsvinkel:	100 °
Drifttid för batteri:	510 h
Stöttålig:	Ja
Ficklampstyp:	Pannbandsficklampa
Ljusets uteffekt (max):	760 LM
Ljuskäglans avstånd (max):	98 m
Livslängd på lampan:	50000 h
Stötsäker upp till:	1.5 m