Pearl Sports CLH-930 Bruksanvisning
Pearl Sports
ej kategoriserat
CLH-930
Läs gratis den bruksanvisning för Pearl Sports CLH-930 (3 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 1.5 recensioner. Har du en fråga om Pearl Sports CLH-930 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/3
Instruction Manual
Congratulations on your purchase!
To get optimum performance of your CLH-930 Closed Hi-Hat Holder,
please read this Instruction Manual before playing.
CLH-930
PEARL CLOSED HI-HAT HOLDER
Plastic Sleeve with Spring
Pipe
Stop Lock
Stop Lock
Wing Nut
Boom Arm
Boom Gear
Hi-Hat Cup
Felt
Nut
Felt
Reversible Nut
Wing Bolt
Tilter
Test the stability of the Holder before using. If
necessary, readjust the length of the boom and / or
the direction of the boom until the Holder is
sufficiently stable.
CAUTION
Attaching the CLH-930 to Adaptor/Pipe Clamps
Loosen the Key Bolt on the Stop Lock on the Pipe with a
Tuning Key to allow the Stop Lock to slide but don't
remove it. Insert the Pipe into an Adaptor or Pipe Clamp
that accommodates 22.2 mm (7/8") diameter pipes. Adjust
the height and tighten the Adaptor / Pipe Clamp. Slide the
Stop Lock against the Adaptor / Pipe Clamp and tighten
the Key Bolt with a Tuning Key. The Boom Arm is housed
inside the Pipe. Loosen the Wing Nut on the Boom Gear
and adjust the length and angle of the Boom Arm. Tighten
the Wing Nut to secure the position. The Boom Arm is
equipped with a Stop Lock that prevents the Boom Arm
from slipping or rotating. Loosen the Key Bolt on the Stop
Lock and position the tab on the Stop Lock into the slot in
the Boom Gear. Tighten the Key Bolt to secure. Loosen
the Wing Bolt on the Tilter to change the tilt of the Cym-
bals. Retighten the Wing Bolt to secure the setting.
Attaching the Hi-Hat Cymbals
Remove the Reversible Nut, Felts, Pl astic Sleeve with
Spring, Nut, and Felt in the order shown (Fig. 1).
Fig. 1
Note
If the Spring comes off from the Plastic Sleeve, reattach it
securely to the post at the bottom of the Plastic Sleeve
before proceeding.
Reversible Nut
Felt
Felt
Cymbal Post
Nut
Plastic Sleeve with Spring
Place the Bottom Cymbal on the lower Felt as shown.
Thread the upper Felt and Nut on the Cymbal Post and
tighten the Nut to secure (Fig.2).
Place the Plastic Sleeve with Spring over the Cymbal Post
followed by the lower Felt and the Top Cymbal as shown.
Press the Top Cymbal downward and attach the upper
Felt and Reversible Nut as shown. Adjust the tightness of
the Reversible Nut to control the amount of tightness or
looseness of the Cymbals (Fig.3).
Fig. 2
Fig. 3
Felt
Nut
Felt
Cymbal Cup
Cymbal Cup
Bottom Cymbal
Reversible Nut
Felt
Plastic Sleeve
with Spring
Felt
Cymbal Post
Knob
Top Cymbal
http://www.pearldrum.com
Products and specifications are subject to change without notice.
Printed in China
-1212-
Produktspecifikationer
| Varumärke: | Pearl Sports |
| Kategori: | ej kategoriserat |
| Modell: | CLH-930 |
Behöver du hjälp?
Om du behöver hjälp med Pearl Sports CLH-930 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Pearl Sports Manualer
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
ej kategoriserat Manualer
- Dexibell
- Omnitronic
- Vocopro
- Gymrex
- Brandson
- Amprobe
- Cat & Hound
- Parasound
- Jupio
- Boretti
- MSW
- Sandstrøm
- Stamony
- WilTec
- Fischer
Nyaste ej kategoriserat Manualer
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025