Pro-Ject Phono Box USB V Bruksanvisning

Pro-Ject mottagare Phono Box USB V

Läs gratis den bruksanvisning för Pro-Ject Phono Box USB V (7 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 3 recensioner. Har du en fråga om Pro-Ject Phono Box USB V eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/7

INSTRUCTIONS FOR USE

Pro-Ject Phono Box USB V

Dear music lover,

thank you for purchasing a PRO-JECT AUDIO phono amplifier.

In order to achieve maximum performance and reliability you should study these instructions for use carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

Setting the cartridge mode

The phono amplifier must be used in either MM (moving magnet) or MC (moving coil) mode according to the

construction principle of the pickup cartridge to be used. Since most cartridges use the MM (moving magnet)

principle the phono amplifier is factory set to operate in this mode. To find out which type your cartridge is

please consult the literature accompanying your cartridge. The literature for MC cartridges should also specify

the correct impedance and capacity into which the cartridge is designed to work. If in doubt please consult

your dealer.

A switch at the back of the phono amplifier sets the correct level of amplification for the cartridge.

Before setting MM / MC mode the unit must be disconnected from the power supply and amplifier.

Connecting the record player or a line level source

Connect the tonearm signal lead to the sockets Phono-In of the phono amplifier. The earthing wire of the

tonearm signal lead may be connected to the screw terminal if you encounter hum problems when using the

record player. The signal lead of a line level source has to be connected to the socket Line-In.

Take care to connect the left and right channels correctly. The right channel is usually marked red, the left

channel black or white.

Phono-In

Line-In

Connection to the amplifier

Connect the Out of the phono amplifier to a line input (such as AUX, CD, Tuner, Tape or Video) on your

amplifier.

Take care to connect the left and right channels correctly. The right channel is usually marked red, the left

channel black or white.

Make all connections whilst the phono amplifier is disconnected from the power supply.

Do not connect the phono amplifiers output to a phono input (sometimes labelled or gram, disc RIAA)

on the amplifier.

Mains power connection

The phono amplifier is supplied with a power supply suitable for your country's mains supply. Check the label

before connecting to ensure compliance with the mains rating in your house. Connect the low voltage plug

from the power supply to the Power ~16V socket of the phono amplifier before connecting the power supply

to the mains.

Front panel controls

Input

Gain

Phono Box USB V

Line

Input selector

Press the button to switch between the inputs Input Phono-In (record player) and Line-In (line level source).

The blue LED on the front panel shows that the input Line-In is selected.

Setting the record level

In case of distorted play back of the recorded music, the level of the analogue signal going to the

A/D converter, can be reduced with the level control (Gain) on the front panel.

Produktspecifikationer

Varumärke:	Pro-Ject
Kategori:	mottagare
Modell:	Phono Box USB V
Vikt:	580 g
Strömförsörjning:	16V, 200mA
Impedans:	100 Ω
Kompatibla operativsystem:	Windows XP, Vista, 7\nMac OS
Total harmonisk distorsion (THD):	0.005 %
Produktens färg:	Svart
bruksanvisning:	Ja
Produktstorlek (BxDxH):	103 x 36 x 103 mm
Frekvensområde:	20 - 20000 hz
Anslutningsteknologi:	Kabel
Signal/brusförhållande (SNR):	94 dB
Dynamiskt omfång (1kHz):	93 dB