Pro-Ject Pre Box DS2 Analogue Bruksanvisning

Pro-Ject mottagare Pre Box DS2 Analogue

Läs gratis den bruksanvisning för Pro-Ject Pre Box DS2 Analogue (5 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 7 recensioner. Har du en fråga om Pro-Ject Pre Box DS2 Analogue eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
INSTRUCTIONS FOR USE
Pro-Ject Pre Box DS2 Analogue
© Pro-Ject Audio Systems · Pro-Ject Pre Box DS2 Analogue · Revision 8. . 201 09 13
2
Dear music lover,
thank you for purchasing this P -Ject Audio preamplifier. ro
Warning of a hazard for the user, the unit or possible misuse
Important notice
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to connect or disconnect the unit from the mains. Make sure that the power
supply is easily accessible at all times. Never handle the device, the power supply while your hands are
wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such
as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never
place any naked flame sources, such as lighted candles on or near the device. The product shall not be used
in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connectors
Make all connections whilst the preamplifier is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.
Never use any other power supply than the one supplied with the unit.
Fix Output
Fix Output
Fix Output
Fix Output
Fix OutputFix Output connects an analogue record device or a headphone amplifier like a Pro-Ject Head Box.
Var O put ut
A power amplifier or active loudspeakers can be connected to the output sockets marked .
Var Out
Var Out
Var Out
Var OutVar Output
put
put
putput
Subwoofer output
An active subwoofer may be connected to the output sockets marked .
Su
Su
Su
SuSub Out
b Out
b Out
b Outb Out
Inputs
The unit has 5 line level RCA inputs marked .
In
In
In
InIn1-
1-
1-
1-1- In 5
In 5
In 5
In 5In 5
!
!
!
© Pro-Ject Audio Systems · Pro-Ject Pre Box DS2 Analogue · Revision 8. .201 09 13
3
Mains power connection and methods to switch the unit on and off
Connect the low voltage plug from the power supply to the socket of the preamplifier
Power 18V
Power 18V
Power 18V
Power 18VPower 18V b
b
b
bbefore
efore
efore
efore efore
connecting the power supply to the mains. The unit can be switched on and off by using 2 different methods
which are equal in priorities.
1. Using front pushbutton to switch on to standby or in
The pushbutton on the front panel of the unit alternately turns the power on or returns it to standby mode. The
blue LED on the front panel shows that the unit is powered on. t be If a trigger signal is present the unit can’
switched off by the pushbutton.
2. Remote power on - triggers
The unit can be switched on via other Box Design components when a 12V trigger voltage is present at the
2.5mm socket marked Trigger Input.
Trigger Input.
Trigger Input.
Trigger Input.Trigger Input. Special power- cables (polarity ) in diverse lengths are available on
as accessories. The remote power-on signal can be relayed to further units via the Trigger
Trigger
Trigger
Trigger Trigger Output
Output
Output
OutputOutput socket. When
the 12V trigger signal is switched off, the unit will also switch off.
Trigger cables may only be plugged into the sockets when the is disconnected from the power unit
supply and from the mains. Failure to do so may result in damage of the unit.
Remote control
POWER
POWER
POWER
POWERPOWER turns the unit on or back into standby
MUTE
MUTE
MUTE
MUTEMUTE has no function on Pre Box DS2 Analog ue
CH+/CH-
CH+/CH-
CH+/CH-
CH+/CH-CH+/CH- select the inputs in turn
1-5
1-5
1-5
1-51-5 access to a specific input directly
+


Produktspecifikationer

Varumärke: Pro-Ject
Kategori: mottagare
Modell: Pre Box DS2 Analogue
Färg på produkten: Zwart
Vikt: 92 g
Bredd: 97 mm
Djup: 61 mm
Höjd: 15.5 mm
LED-indikatorer: Power, Status
Batterikapacitet: 2000 mAh
Typ av förpackning: Doos
Nuvarande: 1 A
På / Av knapp: Ja
SIM-kortstyp: NanoSIM
2G-standarder: Edge
3G-standarder: UMTS
4G standard: LTE-TDD & LTE-FDD
Wi-Fi-standarder: 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Generering av mobilt internet: 4G
USB uttag: Ja
Ethernet LAN: Nee
Typ av strömkälla: Batterij/Accu
Medföljande kablar: Micro-USB
Indikator ljus: Ja
Antal USB 2.0-portar: 1
Batteritid/batteritid: 7 uur
Hållbarhetscertifikat: RoHS
Plug and play: Ja
Typ processor: Ja
Inspänning: 5 V
SIM-kortplats: Ja
3G/4G USB-modemkompatibilitet: Ja
Modulation: 16-QAM, 64-QAM, QPSK
Wifi-band: Single-band (2.4 GHz)
WiFi-standard: Wi-Fi 4 (802.11n)
WLAN-dataöverföringshastighet (max): 150 Mbit/s
WLAN-dataöverföringshastighet (första bandet): 11 Mbit/s
WLAN-dataöverföringshastighet (andra bandet): 54 Mbit/s
Gränssnittstyp Ethernet LAN: Niet beschikbaar
Säkerhetsalgoritmer som stöds: WEP, WPA-PSK, WPA2-PSK
Stöder Windows: Windows 10, Windows 7, Windows 8
3G: Ja
4G: Ja
Antal användare: 10 gebruiker(s)
Inkluderar batteri: Ja
Förvaringstemperatur: -20 - 60 °C
Antal mikro-USB-portar: 1
Processorfabrikant: Qualcomm
Webbaserad hantering: Ja
Stöder Mac-operativsystem: Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks, Mac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey
Mac-kompatibilitet: Ja
GSM-band stöds: 850,900 MHz
USB-laddningsport: Ja
Ethernet WAN: Nee
Överensstämmelse med hållbarhet: Ja
Stöder Linux: Ubuntu 13.04, Ubuntu 13.10, Ubuntu 14.04, Ubuntu 14.10, Ubuntu 15.04, Ubuntu 15.10, Ubuntu 16.04, Ubuntu 16.10, Ubuntu 17.10, Ubuntu 18.04 LTS, Ubuntu 20.04 LTS
Brandvägg: Ja
Snabbinstallationsguide: Ja
DHCP-server: Ja
Antal kanaler: 13 kanalen
DSL WAN: Nee
5G: Nee
WPS-tryckknappssäkerhet: Ja
Drifttemperatur (TT): 0 - 35 °C
Typ produkt: Draagbare router
Antal-produkter-ingår: 1 stuk(s)
Batteriteknik: Lithium-Ion (Li-Ion)
WLAN-dataöverföringshastighet (tredje bandet): 150 Mbit/s
Antenndesign: Intern
VPN-genomföring: Ja
Stöd för Samba (lagring).: Ja
Trådlös statistik: Ja

Behöver du hjälp?

Om du behöver hjälp med Pro-Ject Pre Box DS2 Analogue ställ en fråga nedan och andra användare kommer att svara dig