Salus LX1 Bruksanvisning

Salus ej kategoriserat LX1

Läs gratis den bruksanvisning för Salus LX1 (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 1.5 recensioner. Har du en fråga om Salus LX1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

SYSTEM GUARD

LX1 Inhibitor

•

Suitable for m

xed metal

and plastic sy

tems

•

Prevents corrosion

and limescale

500ml

NSF CIAS

Scan for complete

product specification

SYSTEM GUARD

LX1 Inhibitor

Introduction

How to use SALUS LX1 Inhibitor

500m

SALUS LX1 Liquid Inhibitor is specially formulated for household cen-

tral-heating systems constructed from mixed metals and plastics. It

provides comprehensive protection—preventing corrosion, scale

build-up, boiler noise, pump blockages and cold spots—while elim-

inating the need for frequent radiator venting. By extending system

life, improving fuel eciency and reducing maintenance costs, LX1

sustains peak performance and is non-toxic, making it safe for both

you and the environment.

Shake the bottle thoroughly and make sure the heating system is

lled with water and depressurized.

Pour the entire 500 mL of LX1 into the system (treats ~100 L of

water).

Open the isolation valves to circulate water and mix in the

inhibitor: hot water (> 50 °C) for at least 1 hour, lukewarm (30–40 °C)

for at least 4 hours, or up to 1 week in cold systems.

After circulation, close the valves, drain impurities through the

separator, and ax the treatment date label to the boiler.

Repeat this treatment once a year to ensure ongoing corrosion and

scale protection.

How to use addition date label

Production date info

Instructions

Treat via a partially

drained radiator, Power

Flush machine or through

the Feed and Expansion

tank. After treatment,

bleed radiators to remove

trapped air.

Dose rate

Minimum dosage rate:

500ml per 100-litre

system capacity.

Safety

Keep out of reach of

children. Dispose of

contents/container

inaccordance with national

regulations. Safety data

sheet available on request. -

Do not use with PRIMATIC

single-feed cylinders .

Helpline +44 (0) 1226 323961

Installers must carry out all

works in accordance with

the code of practice found

www.centralheating.co.uk

Peel out installer label

www.salus-tech.com

SALUS Controls GmbH, Dieselstrasse 34, 63165 Mühlheim am Main, Germany

Email Germany: info@salus-controls.de

SALUS Controls plc,Units 8-10, Northfield Business Park, Forge Way, Parkgate,

Rotherham, S60 1SD United Kingdom Email UK: tech@salus-tech.com

Peel out sticker and attach to boiler casing

or boiler logbook

30%

POST-CONSUMER

RECYCLED PLASTIC

UFI: PR20-H0S6-P00W-7WAG

SYSTEM GUARD

LX1 INHIBITOR

SYSTEM GUARD

LX1 INHIBITOR

SYSTEM GUARD

LX1 INHIBITOR

DD.MM.YYYY

SYSTEM GUARD

LX1 INHIBITOR

DD.MM.YYYY

Peel o the date‐label sticker

Find the small, pre-printed ‘Date added’ sticker on the LX1

Inhibitor bottle and gently lift the rounded edge to peel it

away from the bottle.

Every SALUS LX1 bottle bears a seven-character code in the form XXXXWWY. Within this sequence, the pair WW denotes the week of production,

pinpointing the exact week in which the bottle was lled. The trailing character Y signies the year within the decade, matching the nal digit of the

full production year. You should use the product within three years of the date indicated by this code to ensure it performs as intended.

Record the date and ax the sticker

Ax the sticker in place and record the date the inhibitor

was added in the blank eld outlined in red, using the

DD.MM.YYYY format.

Attention: The inhibitor level should be checked annually and re-dosed every ve years.

49 = 49week of the year

4 = 4th year of the decade

(in this case 2024)

SYSTEM GUARD

LX1 Inhibitor

• Suitable for mixed metal