Sauermann COST-S Bruksanvisning

Läs gratis den bruksanvisning för Sauermann COST-S (4 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 6 recensioner. Har du en fråga om Sauermann COST-S eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

COST-S

CO Stats

CO detector

DATA SHEET

ParameterAccuracyMeasuring rangeResolution*

CO±3 ppm or 3% of the reading valueFrom 0 to 500 ppm0.1 ppm

Technical features

*All the accuracies indicated in this technical datasheet were stated in laboratory conditions, and can be guaranteed for measurements carried out in the same conditions, or carried out with calibration compensation.

Features

• RCR relay output,

3 A / 240 Vac (NC),

power supply 24 Vac/Vdc

• ABS V0 IP20 housing

• “¼ turn” system mounting

with wall-mount plate

• Housing with simplied

mounting system

Visual and audible alarm,

red led in front

Measuring range

from 0 to 500 ppm

CO

CO

Output1 RCR relay. NO (normally opened): 5A / NC (normally closed): 3A / 240 Vac.Common mode voltage <30 Vac

Power supply24 VAC/VDC ±10%

Consumption3 VA

Relay and alarm statusRed led in front and internal buzzer (70 dB at 10 cm)

European directives2014/30/EU EMC; 2014/35/EU Low Voltage; 2011/65/EU RoHS II; 2012/19/EU WEEE

Electrical connectionTerminal block for cables Ø0.05 to 2.5 mm

2

. Carried out according to the code of good practice

PC communicationUSB-mini Din cable

EnvironmentAir and neutral gas

Measured parameter

Produktspecifikationer