StarTech.com C6KEY110SWH Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com C6KEY110SWH (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 3.5 recensioner. Har du en fråga om StarTech.com C6KEY110SWH eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
Revision: 04/17/2013
For the most up-to-date information, please visit: www.startech.com
C6KEY110SWH
UTP 180 Keystone Jack
1. Strip o 1-inch (2.5cm) of jacket from one end of the
Cat6 cable.
2. Place the wires into the keystone jack, setting the
wire pairs into the IDC according to the displayed
wiring conguration (A or B) and punch down the
connections.
3. Cut excess wire after punching down the wire pairs.
4. Place the cover over the wires.
NOTE:
1. Never install telephone wiring during a lightning storm.
2. Never install telephone wiring in a wet location unless the wiring is specically designed for wet locations.
3. Never touch un-insulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
4. Use caution when installing or modifying telephone lines.

Produktspecifikationer

Varumärke: StarTech.com
Kategori: Inte kategoriserad
Modell: C6KEY110SWH

Behöver du hjälp?

Om du behöver hjälp med StarTech.com C6KEY110SWH ställ en fråga nedan och andra användare kommer att svara dig