StarTech.com CBMMCTTOOL Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com CBMMCTTOOL (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 8 recensioner. Har du en fråga om StarTech.com CBMMCTTOOL eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 17, 2020 4:13 PM

Product Diagram (CBMMCTTOOL)

Component Function

1Lever • Used to remove excess from a CableSteel

Cable Tie, after it has been tightened.

2Head • Used to hold a during the Steel Cable Tie

tightening process.

3Nose • Used to align the through the Steel Cable Tie

Head of the .Cable Tie Tool

4Grippers • Used to grip a during the Steel Cable Tie

tightening process.

5Handles • Used to tighten a during the Steel Cable Tie

tightening process.

Requirements

For the latest requirements, please visit www.startech.com/CBMMCTTOOL

• Steel Cable Tie

• Set of Cables

• Safety Gloves

Using the Cable Tie Tool

It is recommended that you put on a pair of before handling the Safety GlovesSteel

Cable Tie.

Metal Cable Tie Tool

1. Wrap a around a set of cables.Steel Cable Tie

2. Insert the end of the through the on the Steel Cable Tie Self Locking HeadSteel

Cable Tie.

3. Pull the end of the to tighten the around the set of Steel Cable TieSteel Cable Tie

cables.

4. Insert the end of the through the side of the of the Steel Cable TieHeadCable Tie

Tool Steel Cable Tie NoseCable Tie Toolso that the is in-between the of the and

feeds out the back of the of the in-between the.HeadCable Tie Tool Grippers

Routing the Steel Cable Tie through the Cable Tie Tool

5. Push the of the towards the on the HeadCable Tie ToolSelf Locking HeadSteel

Cable Tie.

6. Squeeze the together, tightening the Cable Tie Tool’s HandlesSteel Cable Tie

around the set of cables.

Note: You will have to squeeze the several times in order Cable Tie Tool’s Handles

to tighten the around the set of cables.Steel Cable Tie

7. When you have reached the maximum tension. Use the to remove the excess Lever

Steel Cable Tie.

Note: Be careful not to over-tighten the , as you may damage the set Steel Cable Tie

of cables.

2

3

5

1

4

Cable Tie

Notch

Cable Tie

Notch

Produktspecifikationer