StarTech.com PEXUSB311AC3 Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com PEXUSB311AC3 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6 recensioner. Har du en fråga om StarTech.com PEXUSB311AC3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: May 14, 2020 2:21 PM

Product Diagram (PEXUSB311AC3)

ComponentFunction

1USB-A Port

• Used to connect a to USB Peripheral Device

the. USB Card

2USB-C Port

• Used to connect a to USB Peripheral Device

the. USB Card

3Bracket Screws

• Used to theorSecure Low Prole Full Prole

Bracket USB Card.to the

4PCI Express Connector

• Used to connect the to the USB CardPCI

Express SlotHost Computer on the .

5SATA Power Connector

• (Optional) Connect a 15 Pin SATA Power

Connector to provide extra power to the USB

Ports.

Requirements

For the latest requirements, please visit www.startech.com/PEXUSB311AC3

• Computer with an available PCI Express® slot (x4, x8, or x16)

• (Optional) SATA Power Source

2-Port USB 3.1 Card - 10Gbps per port - USB-C, USB-A - PCIe

Tools

• Small Phillips Head Screwdriver

Hardware Installation

Warning: USB cards can be damaged by static electricity. Make sure that you are

properly grounded before you open your computer case or touch the . You USB Card

should wear an anti-static strap when you install any computer component. If an anti-

static strap is not available, discharge any built-up static electricity by touching a large

grounded metal surface for several seconds. Only handle the by its edges USB Card

and do not touch the gold connectors.

Installing the Low Prole Bracket

By default the is attached to the . Depending on your Full Prole BracketUSB Card

system conguration you may need to remove the and replace it Full Prole Bracket

with the (included).Low Prole Bracket

1. Using a , remove the two securing Small Phillips Head ScrewdriverBracket Screws

the to the .Full Prole BracketUSB Card

2. Align the on the with the on the Screw HolesUSB CardScrew HolesLow Prole

BracketUSB CardScrew HolesLow . Making sure the is sitting on-top of the on the

Prole Bracket.

3. Insert the through the and into the on the Bracket ScrewsUSB CardScrew Holes

Low Prole Bracket.

4. Using the , tighten the being Small Phillips Head ScrewdriverBracket Screws,

careful not to over-tighten.

Installing the USB Card

1. Turn o the and any that are connected (e.g., ComputerPeripheral Devices

printers, external hard drives, etc.).

2. Unplug the from the back of the and disconnect any Power CableComputer

Peripheral Devices that are connected.

3. Remove the from the . CoverComputer Case

Note: Consult the documentation that came with the for details about Computer

how to do this safely.

4. Locate an open (x4, x8, or x16) and remove the corresponding PCI Express Slot

Metal Cover PlateComputer Case from the back of the .

5. Gently insert the into the open and fasten the USB CardPCI Express SlotBracket

to the back of the .Computer Case

2

5

1

3

4

Produktspecifikationer