StarTech.com Slideshelfd Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com Slideshelfd (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 4 recensioner. Har du en fråga om StarTech.com Slideshelfd eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 22, 2024 1:50 PM

For additional self-service support options and community forums, please visit: www.StarTech.com/support

Product ID

SLIDESHELFD - Revision 02 or Above

ComponentFunction

1Shelf Surface

• Place Rack Equipment

Note: The Sliding Shelf can also be installed upside down

and function as a drawer instead.

2

Release Levers x 2

(Not Shown)

• Located on both sides of the Sliding Shelf

• Allow to release the locking mechanism to retract or

remove the Sliding Shelf from the Rails

• The Release Levers operate in opposite directions. One

moves Down and the other Up

3Handle

• Used to Pull or Push the Sliding Shelf

• The Handle Rotates 180° allowing it to sit ush against

the front of the Sliding Shelf

4

Front Rails x 2

• Allows the Sliding Shelf to slide in or out of position

• Used to attach the Sliding Shelf onto the Front

Mounting Posts of a Rack

5Rear Rails x 2

• Used to attach the Sliding Shelf onto the Rear Mounting

Posts of a Rack

1U Sliding Server Rack Shelf - 22in Deep

Product Information

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit: www.StarTech.com/SLIDESHELFD

How to Identify the LOT Code Revision Number

The Revision Number (Rev #) appears as the fth and sixth digits of the LOT code,

located on the sticker axed to the product and its packaging. If the LOT code

sticker is missing, the product is Rev 01. Refer to www.StarTech.com/SLIDESHELFD to

download the manual for Revision 01.

Requirements

• Phillips Head Screwdriver

• (Optional) Cage Nut Tool

Package Contents

• 1U Sliding Shelf x 1

• Rail Assembly x 2

• M5 Screws with Washers x 8

• M5 Cage Nuts x 8

• Quick-Start Guide x1

Warnings!

Read the entire Quick-Start Guide and ensure the instructions are fully understood

before assembling and using this product.

Before adding equipment to this product, ensure this product has been properly

mounted.

Never operate this product if parts are missing or damaged.

Ensure the weight of the equipment does not exceed the weight capacity of this

product. If the weight capacity is exceeded, personal injury or damage to the

equipment is possible. This product can support the following weight: up to 55.1 lb

(25 kg).

All four mounting points must be properly secured to each of the posts on a four-post

rack.

Never exceed the maximum mounting depth specication for this shelf: 32.2in

(820mm).

1

5

*Product may vary from image

3

2

4

2

Produktspecifikationer