StarTech.com SSPMSUDWM Bruksanvisning
Sidor 2 Engelska Platt panelstöd
Läs bruksanvisningen för StarTech.com SSPMSUDWM gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 25 gånger. Fråga om modellen? Ställ en fråga
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 18, 2019 12:19 PM
Product Diagram (SSPMSUDWM)
ComponentFunction
1
Docking Station
Mount
• Used to mount a StarTech.com Docking
StationHub or to a desk or wall.
2Mounting Holes
• Used to mount the to Docking Station Mount
a desk or wall.
3
Docking Station
Mounting Holes
• Used to mount a StarTech.com Docking
StationHubDocking Station or to the
Mount.
Requirements
For the latest requirements, please visit www.startech.com/SSPMSUDWM
• Robertson Head Screwdriver x 1
Package Contents
• Docking Station Mount x 1
• M3 x 5 mm Screws x 4
• #5-20 x 5/8” Wood Screws x 4
• Quick-Start Guide x 1
Mount for StarTech.com Docking Stations and Hubs
Attaching a StarTech.com Docking Station or Hub
1. Align the on the with the on the Mounting HolesAdapterMounting Holes
StarTech.com Docking StationHub or . The recessed hole pattern should be facing
outward so the will t properly.M3 x 5 mm (Countersunk) Screws
2. Insert the four through the on the M3 x 5 mm ScrewsMounting HolesAdapter
and into the on the or .Mounting HolesStartech.com Docking StationHub
3. Using a (sold separately) tighten the , Phillips Head ScrewdriverM3 x 5 mm Screws
being careful not to over-tighten the .M3 x 5 mm Screws
Mounting the Docking Station Mount on a Desk
Note: Make sure that the thickness of the Desk is greater than 12.5 mm (.5”) to ensure
that the screws do not penetrate the opposite side of the desk.
1. Align the on the desk.Docking Station Mount
2. Insert the # in the on the 5-20 x 5/8” Wood ScrewsMounting HolesDocking
Station Mount.
3. Using a (sold separately), tighten the #Robertson Head Screwdriver 5-20 x 5/8”
Wood Screws.
Mounting the Docking Station Mount on a Wall
Notes: It is recommended to use wall studs when mounting the Docking Station
Mount onto a Wall.
You may need to drill pilot holes when mounting the into a Docking Station Mount
wall stud.
1. Align the on the .Docking Station MountWall
2. Insert the # in the on the 5-20 x 5/8” Wood ScrewsMounting HolesDocking
Station Mount.
3. Using a , tighten the #.Robertson Head Screwdriver5-20 x 5/8” Wood Screws
2
1
3
Produktspecifikationer
| Varumärke: | StarTech.com |
| Kategori: | Platt panelstöd |
| Modell: | SSPMSUDWM |
| Vikt: | 184 g |
| Bredd: | 60 mm |
| Djup: | 120 mm |
| Höjd: | 3 mm |
| Förpackningens bredd: | 125 mm |
| Material: | Stål |
| Kompatibilitet: | DK30C2DPEP, DK30C2DPEPUE, DK30C2DPPD, DK30C2DPPDUE, TB3CDK2DP, TB3CDK2DPUE, HB31C3A1CS, HB31C4AS, HB31C2A1CGS |
| Produktens färg: | Svart |
| Låddjup: | 225 mm |
| Vikt inkl. förpackning: | 200 g |
| Ytterförpackningens höjd: | 235 mm |
| Produkter per ytterförpackning: | 50 styck |
| Ytterförpackningens längd: | 235 mm |
| Ytterförpackningens bredd: | 305 mm |
| Skruvar medföljer: | Ja |
Behöver du hjälp?
Om du behöver hjälp med StarTech.com SSPMSUDWM ställ en fråga nedan och andra användare kommer att svara dig