StarTech.com USB2002EXT2 Bruksanvisning
StarTech.com
Inte kategoriserad
USB2002EXT2
Läs gratis den bruksanvisning för StarTech.com USB2002EXT2 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 11 recensioner. Har du en fråga om StarTech.com USB2002EXT2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
I T: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
P T: Guia do usuário - pt.startech.com
Manual Revision: 12/02/2016
For the most up-to-date information, please visit: www.startech.com
USB2004EXT2
4 Port USB 2.0 Extender over Cat5 or Cat6 - Up to 330 ft (100m)
Packaging Contents
• 1 x USB 2.0 extender local unit
• 1 x USB 2.0 extender remote unit
• 1 x USB 2.0 cable
• 1 x mounting kit
• 1 x universal power adapter
• 5 x power cords (NA, JP, EU, UK, ANZ)
• 1 x quick-start guide
System Requirements
• USB enabled computer system with available USB port
• Available AC power outlet
• Solid core Category 5e unshielded twisted pair (UTP) or greater cabling.
Product diagram
Installation
1. Place the Local and Remote units at the desired locations and
connect together using RJ45 terminated Cat5 or Cat6 cabling.
2. Do one of the following:
• If you are using surface cabling, make sure that you have enough
Cat5e cabling to connect the Local Unit to the Remote Unit’s
location, and that each end is terminated with a RJ45 connector.
The cabling cannot go through any networking equipment (for
example, a router or switch).
• If you are using premise cabling, make sure that the Cat5e
cabling between the Local Unit to the Remote Unit has been
properly terminated in a wall outlet in each location and there
is a patch cable long enough to connect the Remote Unit to
their respective outlets. The cabling cannot go through any
networking equipment (for example, a router or a switch).
3. Connect the power adapter to the Remote unit for the
USB2004EXT2. The Power LED should light up solid.
4. Connect the Local unit to the host computer system with a USB
cable. The computer can be either powered On or O. The operating
system should detect the extender and install it automatically.
5. USB devices can now be connected to the Remote unit.
Front
USB Type A
Connector
Local Unit
LED Status Indicators Extender Status
LED Indicators
Remote Unit
Extender Status
LED Indicators
Back
Local UnitRemote Unit
Power connector
Cong port
Mode button
RJ45 connector
Cong port
Mode button
USB type B
connector (host)
RJ45 connector
About the Cong port and Mode button
You can use the Cong port to troubleshoot issues and update the
rmware.
You can use the Mode button to enter Boot loader mode to
complete an update to the rmware.
Produktspecifikationer
| Varumärke: | StarTech.com |
| Kategori: | Inte kategoriserad |
| Modell: | USB2002EXT2 |
Behöver du hjälp?
Om du behöver hjälp med StarTech.com USB2002EXT2 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad StarTech.com Manualer
18 Mars 2025
18 Mars 2025
3 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
Inte kategoriserad Manualer
- Casetastic
- Vanish
- Aiphone
- Woonexpress
- MagnaPool
- Grohe
- Pangea Audio
- Swiss Eye
- Rio
- Sparkle
- Pattfield
- Sôlt
- Olympia
- Mulex
- Gardenline
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025