Synco G2 Bruksanvisning


Läs gratis den bruksanvisning för Synco G2 (5 sidor) i kategorin mikrofon. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2.5 recensioner. Har du en fråga om Synco G2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
1
SYNCO G2 Wireless Lavalier Microphone FAQ
Q1: What should I do if I lost the accessories of my product? How
can I get after-sales support?
If you have lost any accessories or need after-sales assistance, please
contact Synco Audio’s official customer support via email
at support@syncoaudio.com. They will provide further guidance and support
to resolve your issue.
For faster service, include your product details and a description of the
problem in your email.
Q2: The receiver stops working/signal drops . What should I do?
1. Check Battery Level
The receiver (RX) may have low battery, causing unexpected shutdowns or
signal drops.
Connect the RX to a power source using the included Type-C charging
cable.
Charge for 5-10 minutes, then try powering it on again.
If the device turns on, continue charging until fully charged (~2 hours).
2
2. Check Pairing Status:
Ensure the transmitter (TX) and receiver (RX) are successfully paired (screen
displays "Connected").
If not connected, try manual pairing: Press and hold the power buttons on
both TX and RX for 8 seconds to enter pairing mode.
3. Restart Devices:
Turn off devices by holding the power button for 3 seconds, then power
them back on.
4. Contact Support:
If the issue persists, email support@syncoaudio.com with your purchase
receipt and a description of the issue.
Q3: There’s significant background noise during recording/noise
cancellation isn’t working. How to fix this?
1. Enable Noise Cancellation:
Press the Noise Cancellation button on the TX to cycle through modes:
Off Low-Level High-Level (recommended for noisy environments).
2. Adjust Gain Settings:


Produktspecifikationer

Varumärke: Synco
Kategori: mikrofon
Modell: G2

Behöver du hjälp?

Om du behöver hjälp med Synco G2 ställ en fråga nedan och andra användare kommer att svara dig