Atdec SD-AT-DW-BK Bruksanvisning

Atdec Inte kategoriserad SD-AT-DW-BK

Läs gratis den bruksanvisning för Atdec SD-AT-DW-BK (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 10.5 recensioner. Har du en fråga om Atdec SD-AT-DW-BK eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/4

Component Checklist

Articulated Arm

Assembly (x1)

Cable Wrap

Applicator (x1)

Top Cap Tool (x1)

2.5mm Allen

Key (x1)

Cable Clip

(x3)

Extension

Clip (x4)

Component Checklist

Check you have received all parts against the Component Checklist above.

Bits Box

Mounting Fasteners

M4x10mm

Screw (x4)

M4x12mm

Screw (x4)

M4x16mm

Screw (x4)

16mm Cable

Wrap (x1)

5mm Allen

Key (x1)

Nylon Anchor

Plugs (x4)

M6x40mm

Coach Screw (x4)

Direct Wall Mount

Timber Stud

Wall

Direct Wall Mount

Bracket

4mm Hole

M6 Washer

M6 Coach Screw

B.1.2.

B.1. For Timber Stud Mounting - Use the Direct Wall

Mount Bracket to mark out the location of the required

four holes. (see diagram B.1.1.) Drill 4mm holes deep

enough to receive the M6 Coach Screws, insert the screws

and secure the bracket to the wall. (see diagram B.1.2.)

B.2. For Masonry Mounting - Use the Direct Wall Mount

Bracket to mark the location of the required four holes. (see

diagram B.1.1.) Using an

8mm masonry drill bit, drill four holes

41mm deep. Insert the Nylon Anchors and then secure the Bracket

to the wall using the M6 Coach Screws. (see diagram B.2.1.)

Installation Instructions

SPACEDEC ACROBAT

SD-AT-DW / WALL ARTICULATED ARM

Direct Wall Mount

Bracket

8mm Hole

M6 Washer

M6 Coach Screw

Brick or Concrete Wall

B.2.1.

S8 Nylon Anchor

Front View of the Direct Wall

Mount Bracket

B.1.1.

Direct Wall Mount

Bracket Assembly (x1)

M6 Washer (x4)

Refer to Ergonomic guidelines overleaf to determine best position to mount wall bracket.

Note: Ensure Bracket is

mounted Vertically

Top Cap

Threaded Rod

Bottom Cap

Direct Wall Mount

Bracket

Produktspecifikationer

Varumärke:	Atdec
Kategori:	Inte kategoriserad
Modell:	SD-AT-DW-BK
Maxvikt:	9 kg
Produktens färg:	Svart
VESA-montering:	VESA 3"x3" & VESA 4"x4"
Produktlängd:	610 mm
Kompatibla skärmstorlekar:	12/24 "
Svängradie:	40 °
Minsta kompatibla skärmstorlek för bärbar dator:	12 "