Drayton Digitstat+C RF Bruksanvisning

Läs gratis den bruksanvisning för Drayton Digitstat+C RF (4 sidor) i kategorin Termostat. Guiden har ansetts hjälpsam av 37 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 7 recensioner. Har du en fråga om Drayton Digitstat+C RF eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

06490084001 ISS E

06490084001 ISS E

Simple Setting or Operating

To set the requiredtemperature

• The display normally shows thecurrent setpoint.

• To adjustthe required temperature,turn the

dial clockwise to increase oranti-clockwise to

decrease,(1click = 5ºC), the LCD willdisplay

the temperature setpoint as it is being

adjustedand ‘SET’ will be displayed. After a

few seconds thedisplay willreturn

tonormal

operation and will display the current setpoint.

While adjusting the temperature duringnormal

operation, when you reach the maximum(70

o

C

default)or minimum(40

o

Cdefault) possible setting,

one further click will put the productin to a

positive ON (after 70

o

C)orpositiveOFF (after40

o

C)

position - see ‘Commissioning theCylinder

Thermostat’ within the InstallerGuide forfurther

details.

Signal Strength

Before fixing the Digistat +CRF to the wall it isrecommendedto first

check the signalstrengthfromthatlocation.

Todothis, removethebatteries, press andholdthe ‘set’buttonwhilst

refitting thebatteries, keepthe ‘set’buttonheldandafter afew

seconds the displaywillshow‘rF’whichindicatesthatthe Digistat +CRF

iscontinuously sending anOFFsignal to the SCR(receiver).Leavethe

Digistat +CRF inpositionandreturntoviewthe SCR.If the redLEDis

continuously flashing,thisindicatesagoodsignal.If the redLEDisnot

flashing,thisindicatesapoor signal andyouneedto repositionthe

Digistat +CRFuntilthe redLEDisflashing.

When the signal strength has been confirmedremovethe batteriesto

cancelthe testandfollowthe installation instructions.

06490084001 ISS E 492.5x312 19/10/07 14:26 Page 1

Produktspecifikationer