Eliminator Lighting Electro MH25R Bruksanvisning
Eliminator Lighting
ej kategoriserat
Electro MH25R
Läs gratis den bruksanvisning för Eliminator Lighting Electro MH25R (4 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 12.5 recensioner. Har du en fråga om Eliminator Lighting Electro MH25R eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Electro MH25R
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
Introduction:
This unit can be either an 8 or 12 channel DMX intelligent moving head unit. The Electro MH25R has 3 operat-
ing modes; sound active mode, auto program mode (test mode), or it can be controlled by a DMX controller.
The unit can be run as a stand alone unit or in a Master/Slave configuration. This unit has been tested and
the lamp has been installed at the factory, there is no assembly required. The unit is ready to be plugged in to
a power outlet. There are no dipswitch settings for Master/Slave mode, just simply link the units together. To
enhance the beams effects you can use a fog machine. This unit looks good in pairs.
CAUTION! Please read and understand these instructions before installing or operating this unit.
SPECIFICATIONS:
Model: Electro MH25R
LED: 1 x 25W LED
Weight: 19lbs./ 18.6kgs.
Size: 12” (H) x 10.5” (W) x
10” (L)
Fuse: 2 Amp
Supply Voltage: 110V-240V 50/60Hz
Working Position: Any Safe position
Duty Cycle: None
DMX Channels: 2 DMX Channel Modes
8 Channel Mode &
12 Channel Mode
Gobos: 7 plus Spot
Colors: 8 Colors + White
Warranty: 1 Year
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our
1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: motors, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.
Fuse Replacement: Locate and remove
the unit’s power cord. Once the cord has
been removed located the fuse holder
located inside the power socket. Insert
a flat-head screw driver into the power
socket and gently pry out the fuse holder.
Remove the bad fuse and replace with a
new one. The fuse holder has a built-in
socket for a spare fuse be sure not to
confuse the spare fuse with active fuse.
Produktspecifikationer
| Varumärke: | Eliminator Lighting |
| Kategori: | ej kategoriserat |
| Modell: | Electro MH25R |
Behöver du hjälp?
Om du behöver hjälp med Eliminator Lighting Electro MH25R ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Eliminator Lighting Manualer
13 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
20 Augusti 2025
19 Augusti 2025
19 Augusti 2025
19 Augusti 2025
ej kategoriserat Manualer
- Testboy
- Geemarc
- MuxLab
- Jacob Jensen
- Dorr
- Benavent
- U-Line
- Nextorage
- RCF
- Peplink
- NANO Modules
- Oase
- Muse
- Danfoss
- VOREL
Nyaste ej kategoriserat Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025