Eliminator Lighting Gyro LED Bruksanvisning

Läs gratis den bruksanvisning för Eliminator Lighting Gyro LED (4 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 3 recensioner. Har du en fråga om Eliminator Lighting Gyro LED eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

GYRO LED

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Introduction:

The Gyro LED is a 7 channel DMX intelligent scanner unit. The Gyro LED has 3 operating modes; sound

active mode, auto program mode, or it can be controlled by a DMX controller. The unit can be run as a stand

alone unit or in a Master/Slave configuration. This unit has been tested at the factory, there is no assembly

required. The unit is ready to be plugged in to a power outlet. To enhance the beams effects you can use a

fog machine. This unit looks good in pairs.

CAUTION! Please read and understand these instructions before installing or operating this unit.

SPECIFICATIONS:

Model: Gyro LED

LED: 1 x 25W LED

Weight: 9.4lbs./ 4.3kgs.

Size: 12.75” (H) x 6” (W) x

5” (L)

Fuse: 2 Amp

Power Consumption: 50W

Supply Voltage: 110V-240V 50/60Hz

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 7 DMX Channels

Gobos: 11 plus Spot

Colors: 8 Colors + White

Warranty: 1 Year

CAUTION! Please read and

understand these instructions

before installing or operating

this unit.

Fuse Replacement:Locate and remove

the unit’s power cord. Once the cord has

been removed located the fuse holder

located inside the power socket. Insert

a flat-head screw driver into the power

socket and gently pry out the fuse holder.

Remove the bad fuse and replace with a

new one. The fuse holder has a built-in

socket for a spare fuse be sure not to

confuse the spare fuse with active fuse.

Produktspecifikationer