EXSYS EX-1310-TTL Bruksanvisning
EXSYS
ej kategoriserat
EX-1310-TTL
Läs gratis den bruksanvisning för EXSYS EX-1310-TTL (6 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2 recensioner. Har du en fråga om EXSYS EX-1310-TTL eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
1
Thank you for purchasing this USB to RS232 TTL/CMOS Adapter Cable w/ 5-pin
Terminal Blocks (the Adapter Cable ). It is an intelligent expansion cable that “ ”
connects to a PC or server via the Universal Serial Bus (USB), providing
high-speed serial connectivity. The serial port fully compatible with RS232 is
serial standard but with TTL/CMOS logic level instead. There are 2 models
available, one is non-isolated and the other is isolated version. With the
selectable logic level voltage, it is an ideal and instant solution for most critical
applications.
EX- -TTL / 1310IS- 1310 TTL
USB to RS232 TTL/CMOS Adapter Cable
w/ 5-pin Terminal Blocks
1. Introduction
2. Connector Layout
T Host USB2.0 o
Port (Type-A)
TTL/CMOS Serial
Port, with -TB 5
Terminal Blocks
Connector
Logic Level Voltage
Selecting Switch
USB to RS232 TTL/CMOS Adapter Cable w/ 5-pin Terminal Blocks
2
Features:
✓ Provides 1 TTL/CMOS RS232 Serial Port over USB Port
✓ Supports 3-Signal TTL/CMOS RS232 Conversion:
(TXD, RXD, GND)
✓ The 2,500Vrms Isolation Model is Available
✓ Supports a 5-pin Terminal Blocks for TTL/COMS
Signal Wiring
✓ 5V/3.3V/2.5V/1.8V Logic Level Selectable by DIP Switch
✓ Signal Levels are Similar to Standard RS232 but
in TTL/CMOS Swing Level
✓ Easy Serial Port Expansion over USB Port
✓ USB1.1 and USB2.0 Forward Compatible
✓ Supports Serial Speed from 300bps to 921.6Kbps
✓ Supports 7,8 Data Bits
✓ Odd, Even, Mark, Space, None parity mode
✓ Supports 1, or 2 Stop Bits
✓ Supports Win98, Me, XP, CE, 2000, 2003, 2008
Win 7, Vista, Win 8 , 10 Linux and Mac OS .x
The configuration of the Adapter Cable is made via a DIP switch as shown by
the following picture. The pin#1 to 3 is for non-Isolated version only. Pin#4 is
dedicated for the isolated version only.
3. Jumper Settings
Pin#1 to 3 are for
the Non-Isolated
Version Only
Pin#4 is for the
Isolated Version
Only
USB to RS232 TTL/CMOS Adapter Cable w/ 5-pin Terminal Blocks
3
1.
Non-Isolated Version Settings:
NOTE:
Only one of the 3 DIP switch pins (pin#1~3) is allowed to be set to ON
anytime. Set 2 or more DIP switch pins ON will make the logic level
voltage incorrectly merged together and cause the hardware conflict
DIP Switch Settings
Description
5V Logic Level (Default)
3.3V Logic Level
Logic Level is determined by the external DC
voltage value applied on the Pin#4 of the
5-pin Terminal Blocks. If 2.5V is applied, then
the Logic level is set to 2.5V
2.
Isolated Version Settings:
The Isolated version setting is very simple, only 5V or 3.3V depends on the
Pin#4 DIP switch settings. The default is set at 5V.
DIP Switch Settings
Description
Produktspecifikationer
| Varumärke: | EXSYS |
| Kategori: | ej kategoriserat |
| Modell: | EX-1310-TTL |
Behöver du hjälp?
Om du behöver hjälp med EXSYS EX-1310-TTL ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat EXSYS Manualer
30 Juni 2025
30 Juni 2025
30 Juni 2025
27 Juni 2025
27 Juni 2025
27 Juni 2025
26 Juni 2025
26 Juni 2025
26 Juni 2025
30 Maj 2025
ej kategoriserat Manualer
- Sommer
- Tunturi
- Hoshizaki
- Omnitronic
- EMOS
- Arturia
- TP Link
- Transparent
- Eufy
- LG
- Smart365
- Hager
- Nitecore
- Electrolux
- Teslong
Nyaste ej kategoriserat Manualer
30 Juni 2025
30 Juni 2025
30 Juni 2025
30 Juni 2025
30 Juni 2025
30 Juni 2025
30 Juni 2025
30 Juni 2025
30 Juni 2025
30 Juni 2025