EXSYS EX-44352IS-4K Bruksanvisning

EXSYS ej kategoriserat EX-44352IS-4K

Läs gratis den bruksanvisning för EXSYS EX-44352IS-4K (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 49 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 25 recensioner. Har du en fråga om EXSYS EX-44352IS-4K eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

TXD LED

(Gelb)

6 5 1

S1: 4KV Isolierter RJ45

Seriell Anschluss

Die EX 44352IS 4KV ist eine PCI Express serielle RS 232 Karte mit 2 seriellen FIFO 16C550 - - - -

Ports, für den Anschluss von High Speed seriellen RS 232 Peripherie Geräten (z.B. Terminal, - -

Modem, Plotter usw.). Die EX 44352IS 4KV unterstützt 15KV ESD Surge Protection auf allen - -

Leitungen und Optical Isolation von 4KV. Der serielle PCI Express Bus unterstützt dabei optimal -

die Leistung des schnellen 16C550 Chipset mit 256byte FIFO Cache. Die Karte gewährleistet

so eine sichere Datenübertragung und exzellente Performance von bis zu 115,2KBaud/s! Sie

unterstützt alle PCI Express Slots von x1 bis x16. Es ist nicht möglich die I/O Adressen und -

Interrupts manuell einzustellen, da die Einstellungen der Karte vom System (BIOS) und vom

Betriebssystem automatisch vorgenommen werden.

BESCHREIBUNG & TECHNISCHE DATEN

Kompatibilität: PCI Express p1-x1 bis x16 -

Betriebssysteme: Windows DOS/ 2000/ XP/ Vista/ 7/ 8.x/ 10/ Server 20xx/ Mac/ Linux

Anschlüsse: 2x RJ45 auf 9 Pin Seriell Anschluss

Lieferumfang: EX 4352IS 4KV, 2x Cat.6 Netzwerk Kabel, - - -

2x Adapter RJ45 auf 9 Pin, Treiber CD, Anleitung

Zertifikate:

CECE

/ FCC / RoHS / WEEE DE97424562 / WHQL

LED & ANSCHLÜSSE

Anleitun

Vers. 1.0 / 21.12.16

E 44352I 4K

AUFBAU

If you are ready with the jumper settings, please proceed with the following installation instructions.

Because there are large differences between PC’s, we can give you only a general installation

guide. Please refer to your computer’s reference manual whenever in doubt.

1. Turn off the power to your computer and any other connected peripherals.

2. Remove the mounting screws located at the rear and/ or sides panels of your Computer and

gently slide the cover off.

3. Locate an available expansion slot and remove its covers from the rear panel of your comput-

er. Make sure it is the right expansion slot for the card (see card description)

4. Align the card with the expansion slot, and then gently but firmly, insert the card. Make sure

the card is seated and oriented correctly. Never insert the card by force!

5. Then connect the card with a screw to the rear panel of the computer case.

6. Connect now the two Cat.6 Netware cable to the RJ45 connector. Then you connect the

RJ45 to 9 pin adapter.

7. Gently replace your computer’s cover and the mounting screws.

HARDWARE INSTALLATION

CONNECTORS

Windows

After completing the hardware installation, the operating system will automatically the card and

install this! If the driver should not be installed automatically, insert the driver CD into you CD-

ROM drive (eg drive D:) and then open the folder „IO/MOSCHIP/MCS99xx“. Please select the

folder with your operating system and install the driver (see Picture). Follow the hardware

assistant and finish the installation. Important! Restart your PC in any case after installing the

drivers.

DRIVER INSTALLATION

CHECK INSTALLED DRIVER

Open the >Device manager<. Now you should see at „ “ and at Ports (COM & LPT)

„ “ the following new entry's:Multifunction Adapter

If you see this or a similar information the device is installed correctly.

CHANGE PORT NUMBER

If you like to change the port number for example COM3 to COM5, open the „Device Manager ”

click at „COM3”, „ Settings ” and then „Advance”. There you can change between COM3 till

COM256.

Windows Server 20xx

After completing the hardware installation, the operating system will automatically the card and

install this! If the driver should not be installed automatically, insert the driver CD into you CD-

ROM drive (eg drive D:) and then open the folder „IO/MOSCHIP/MCS99xx“. Please select the

folder with your operating system and install the driver (see Picture). Follow the hardware

assistant and finish the installation. Important! Restart your PC in any case after installing the

drivers.

Use the following driver for the following Windows Server Version.

Windows Server 2003 = XP Driver

Windows Server 2008 = VISTA Driver

Windows Server 2008R2 = Windows 7 Driver

Windows Server 2012 = Windows 8.x Driver

Windows Server 2012R2 = Windows 10 Driver

CHECK INSTALLED DRIVER

Open the >Device manager<. Now you should see at „ “ and at Ports (COM & LPT)

„ “ the following new entry's:Multifunction Adapter

If you see this or a similar information the device is installed correctly.

CHANGE PORT NUMBER

If you like to change the port number for example COM3 to COM5, open the „Device Manager ”

click at „COM3”, „ Settings ” and then „Advance”. There you can change between COM3 till

COM256.

MS DOS-

Please read the manual on the driver CD. You will find the manual in the following folder

„IO/MOSCHIP/MCS99xx/DOS“.

LINUX

The required Linux driver are located in the following directory „IO/MOSCHIP/MCS99xx/Linux“.

S2: 4KV Isolierter RJ45

Seriell Anschluss

9 Pin Stecker

LED:

RXD LED

(Grün)

RJ45:

DB 9:

8 1

RJ45 Pin# Signals DB9M Pin#

1 DSR 6

2 RTS 7

3 GND 5

4 TXD 3

5 RXD 2

6 DCD 1

7 CTS 8

8 DTR 4

- RI 9

Produktspecifikationer

Varumärke:	EXSYS
Kategori:	ej kategoriserat
Modell:	EX-44352IS-4K
Vikt:	200 g
Bredd:	86 mm
Djup:	70 mm
Värdgränssnitt:	PCIe
Seriellt gränssnitt:	RS-232
Databitar:	5, 6,7, 8
Windows-operativsystem som stöds:	Ja
Mac-operativsystem som stöds:	Ja
Plug & Play-kompatibel:	Ja
Linux operativsystem som stöds:	Ja
Intern:	Ja
Ändamål:	PC
Utgränssnittet:	Serial
Drivrutiner medföljer:	Ja
stoppbitar:	1, 1.5, 2