Gira 039900 Bruksanvisning

Gira Smarth hem 039900

Läs gratis den bruksanvisning för Gira 039900 (6 sidor) i kategorin Smarth hem. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 6 recensioner. Har du en fråga om Gira 039900 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/6

Blind controller insert without auxiliary input

Order No. : 0399 00

Operating instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the devise or

load. At the same time, take into account all circuit breakers that supply dangerous

voltage to the device or load.

Risk of injury. Use the device only for controlling Venetian blind and roller shutter

motors or awnings. Do not use it to switch other loads.

For parallel connection of several motors to an output it is essential to observe the

corresponding instructions of the manufacturers, and to use a cut-off relay if necessary.

The motors may be destroyed.

Use only venetian blind motors with mechanical or electronic limit switches. Check the

limit switches for correct adjustment. Observe the specifications of the motor

manufacturers. Device can be damaged.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Device components

Figure 1

(1) Venetian blind control

(2) Frame

(3) Shutter cover

(4) Terminals

(5) Space for sensor terminal block

1/6

32537112 11.09.2013

Blind controller insert without auxiliary input

10860473

Blind control system

3 Function

Intended use

- Controlling electrically driven blinds, rolling shutters and awnings

- Operation with suitable shutter cover

- Installation in appliance box according to DIN 49073

Product characteristics

- Relay contacts of both running directions are mechanically interlocked

- Supports sensor functions of the cover

4 Information for electrically skilled persons

4.1 Fitting and electrical connection

DANGER!

Electrical shock when live parts are touched.

Electrical shocks can be fatal.

Before carrying out work on the device or load, disengage all the

corresponding circuit breakers. Cover up live parts in the working environment.

Connecting and mounting the Venetian blind control

Figure 2: Connection of control

o Connect venetian blind control according to connection diagram (Figure 2).

o Install Venetian blind control in appliance box, terminals must be at the bottom.

Recommendation: Use deep accessory sockets.

o Attach the frame and the cover.

o Check function. If the blind/shutter moves in the wrong direction, exchange the

connections.

4.2 Installing sensor cable for covers with sensor evaluation

Installation instructions for sensors

i The sensor cable carries safety extra-low voltage (SELV). Observe fitting instructions

according to VDE 0100.

32537112 10860473 11.09.2013

2/6

Blind control system

Blind controller insert without auxiliary input

The sensor cable can be installed in three different ways. In-wall routing (Figure 4), surface-

mounted routing (Figure 5), and with appropriate covers plugging the sensor cable into the

cover (Figure 6).

i The sensor cable must not be too long, because otherwise interference from other loads

and cables may occur. This may result in malfunctions. Therefore use only shielded cables,

and connect the shielding to earth. The total length must not exceed 20 m; avoid proximity

to other electrical facilities.

Connecting sensors to terminal block

i If the sun and glass break sensor are used at the same time, an adapter must be used.

The adapter is connected to a cover with sensor evaluation or to the insert via the

3-pole terminal block. The adapter has two sockets for connecting the sensor plug.

Figure 3: Connection to the terminal block

o Connect sensors as shown in connection diagram (Figure 3). The glass break sensor is

connected on the left and in the middle, and the sun sensor is connected on the right and

in the middle.

For the sensors, the "ground" is identified.

For the adapter and the extension cable, the "sun" is identified. The "ground" is the middle

cable.

i Interchanging the connections will result in malfunctions.

32537112 10860473 11.09.2013

3/6

Blind control system

Blind controller insert without auxiliary input

Produktspecifikationer

Varumärke:	Gira
Kategori:	Smarth hem
Modell:	039900
Produkttyp:	Ställdon till persienn-/ fönsterluckstängare
Färg på produkten:	White, Black
Inbyggd display:	Nej
Vikt:	119 g
Bredd:	97.5 mm
Djup:	23.5 mm
Höjd:	61.5 mm
Blåtand:	Nee
Beeldscherm:	LCD
Skärm diagonal:	2.7 "
Upplösning:	640 x 480 Pixels
Minneskortets maximala kapacitet:	32 GB
Videoformat som stöds:	AVI
Typ av strömkälla:	Batterij/Accu
Medföljande kablar:	USB
Kompatibla minneskort:	MicroSD (TransFlash)
Batteri/Batterispänning:	1.5 V
Brännvidd:	2.8 - 8.5 mm
Antal batterier/batterier som stöds:	2
Certifiering:	CE
USB-version:	2.0
Bildstabilisator:	Nee
Självutlösare:	10 s
Megapixlar:	10 MP
Maximal bildupplösning:	- Pixels
Bildsensortyp:	CMOS
Bildsensorstorlek:	- "
Kameratyp:	Compactcamera
Digital zoom:	4 x
Optisk zoom:	- x
Inbyggd blixt:	Ja
ISO-känslighet:	100,200,400,800
Blixtlägen:	Flits aan
Maximal videoupplösning:	- Pixels
Framerate Motion JPEG:	30 fps
HD typ:	Niet ondersteund
Inbyggd mikrofon:	Ja
Internminne:	- MB
Andra LCD-skärmen:	Ja
Bildformat som stöds:	JPG
Förvaringsväska:	Ja
USB-kontakt:	Micro-USB A
Minsta brännvidd (35 mm filmekvivalent):	- mm
Maximal brännvidd (35 mm filmekvivalent):	- mm
Snabbaste slutartiden för kameran:	1/4000 s
Längsta slutartid för kameran:	0.125 s
Spela kamera:	Single image, Thumbnails
Spänning:	230 V
Axelrem:	Ja
Andra displayen diagonal:	1.8 "
Batteriteknik:	Alkaline
Batterityp:	AAA
Produktens färg:	Metallisk
Ingångsfrekvens:	50 hz
Temperatur vid drift:	0 - 55 ° C
Monteringssätt:	Infälld
Strömkälla av typen:	AC
Inbyggt djup:	33 mm