Klein Tools ET310 Bruksanvisning

Läs gratis den bruksanvisning för Klein Tools ET310 (13 sidor) i kategorin mätning. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om Klein Tools ET310 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/13
INSTRUCTION MANUAL
ENGLISH
Digital Circuit Breaker Finder
VISUAL & AUDIBLE
INDICATIONS
CLEARLY IDENTIFY
CORRECT BREAKER
90-120V AC
OPERATION
CONDITION AT
ELECTRICAL OUTLETS
TEST GFCI DEVICES
2
m IP40
ET310
FRANÇAIS p. 17
ESPAÑOL pág. 9
5000573
2
GENERAL SPECIFICATIONS
The Klein Tools ET310 is a digital circuit breaker finder used to locate
the correct circuit breaker in a panel to which an electrical outlet or
fixture is connected. The transmitter is connected to the electrical
outlet or fixture in the circuit while the receiver is used to scan the
breakers in the circuit breaker panel.
Operating Voltage: 90V to 120V AC, 50/60Hz
Operating Altitude: 6562 ft. (2000m)
Relative Humidity: <90% non-condensing
Operating Temp: ° ° ° °32 to 122 F (0 to 50 C)
Storage Temp: ° ° ° °-4 to 122 F (-20 to 50 C)
Dimensions (transmitter docked in receiver):
10.96" x 2.16" x 1.39" (278 x 55 x 35 mm)
Weight (transmitter, receiver, and batteries): 7.2 oz. (204 g)
Battery (receiver): 1 x 9V Alkaline (included)
Auto-Power Off (receiver): Following 3 minutes of inactivity
Standards:
Conforms to: UL STD 61010-1,
61010-2-030 1436.
Certified to: CSA STD C22.2 # 61010-1,
61010-2-030, 160.
Drop Protection: 6.6 ft. (2m)
Ingress Protection: IP40 dust resistant
Pollution Degree: 2
Specifications subject to change.
ENGLISH
SYMBOLS ON BACK OF TESTER
Risk of electric shock
This product has been independently
tested by Intertek and meets applicable
published standards.
Warning or Caution
Read Instructions – Battery disposalWEEE
5000573
4
ENGLISH
WARNINGS
To ensure safe operation and service of the meter, follow these
instructions. Failure to observe these warnings can result in
severe injury or death.
Failure to follow instructions could result in death or serious injury.
Prior to use, always verify tester operation by testing on a known live
and correctly wired electrical outlet.
DO NOT use if the tester appears damaged in any way.
The tester is intended for indoor use only.
The tester is designed for use with 120V AC electrical systems. DO
NOT connect to higher voltage electrical supplies.
Other equipment or devices attached to the circuit being tested could
interfere with the tester, clear the circuit before testing.
This tester only detects common wiring problems. Always consult a
qualified electrician to resolve wiring problems.
If using accessories to connect to bare wires ensure that the circuit
is not energized before inspecting, applying, or removing the
transmitter.
Exercise extreme caution around energized, bare wires, especially
when working in or around an open breaker panel.

Produktspecifikationer

Varumärke: Klein Tools
Kategori: mätning
Modell: ET310
Vikt: 204 g
Bredd: 35 mm
Djup: 278 mm
Höjd: 55 mm
LED-indikatorer: Ja
Överspänningskategori: CAT II
Produktens färg: Orange
Material, hölje: Acrylonitrile butadiene styrene (ABS), Polycarbonate (PC)
AC-spänningsområde: 90 - 120 V
Batterispänning: 9 V
Batterier medföljer: Ja
Funktionsprincip: Kontakt

Behöver du hjälp?

Om du behöver hjälp med Klein Tools ET310 ställ en fråga nedan och andra användare kommer att svara dig