Mount-It! MI-1377 Bruksanvisning

Läs gratis den bruksanvisning för Mount-It! MI-1377 (5 sidor) i kategorin Platt panelstöd. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 3.9 stjärnor baserat på 11.5 recensioner. Har du en fråga om Mount-It! MI-1377 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
HEAVY-DUTY TILT TV
WALL MOUNT
MI-1377
Please scan this QR code
to visit the product page.
Thank you for choosing Mount-It
2
Mount-It!
Mount-It!
Mount and Accessories
4
• Use a stud finder to locate the center of the studs and hold Wall Mount(#C) to the wall in the desired
mounting location.
• Place the Bubble Level (#E) centered on the top of the Wall Mount (#C) and ensure that the mount is
level.
• Mark the center of the studs through the mount as shown.
• Remove the Mount from the wall and drill holes in the marked locations using a 3/16” drill bit (4.5mm) to
a depth of 2.2” (55mm).
• Hold the Wall Mount (#C) to the wall over the holes, check the level once again, and install the 4 Lag
Screws (#W-A) and Washers (#W-C) then tighten until secure.
Wood Stud Installation Option
Step 1a Step 1b

Produktspecifikationer

Varumärke: Mount-It!
Kategori: Platt panelstöd
Modell: MI-1377

Behöver du hjälp?

Om du behöver hjälp med Mount-It! MI-1377 ställ en fråga nedan och andra användare kommer att svara dig