Mount-It! MI-6772 Bruksanvisning

Läs gratis den bruksanvisning för Mount-It! MI-6772 (7 sidor) i kategorin Platt panelstöd. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 12 recensioner. Har du en fråga om Mount-It! MI-6772 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/7
DUAL MONITOR MOUNT WITH
GAS SPRING ARMS
MI-6772
Please scan this QR code
to visit the product page.
Thank you for choosing Mount-It
2
COMPATIBLE VESA SIZES
75x75 100x100 32
COMPATIBLE WITH
TVs UP TO
Mount-It!
Mount-It!
Mount and Accessories
Open the clamp to be wider than the width of the desk then slide the clamp into place in the desired
location. Tighten the clamp back down using 6mm Hex Wrench (#K) until it is secure. Slide the Cable
Management Clip (#F) into place as shown.
4
Clamp Installation Option
Use 6mm Allen Key (#K) to remove the bolt from the center of Mount Base (#C). This will also detach
the lower clamp portion. Store the removed parts to be able to convert the mount to a clamp configuration.
Grommet Installation Option
Step 1
0.4”-2”

Produktspecifikationer

Varumärke: Mount-It!
Kategori: Platt panelstöd
Modell: MI-6772

Behöver du hjälp?

Om du behöver hjälp med Mount-It! MI-6772 ställ en fråga nedan och andra användare kommer att svara dig