Mount-It! MI-396 Bruksanvisning


Läs gratis den bruksanvisning för Mount-It! MI-396 (5 sidor) i kategorin Platt panelstöd. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 7 recensioner. Har du en fråga om Mount-It! MI-396 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
FULL MOTION OUTDOOR
TV WALL MOUNT
MI-396
Thank you for choosing Mount-It
2
3
Mount-It!
Mount-It!
COMPATIBLE VESA SIZES
COMPATIBLE WITH
TVs UP TO
PACKAGE CONTENTS
VESA MOUNTING HARDWARE
Missing Parts? Call us at (855) 925-5668 and we will ship replacement parts free of charge.
50kg
(110lbs)
RATED
WALL MOUNTING HARDWARE
Wall Mount
VESA Arms Hex Wrench
Cable Ties
5
4
• With a stud finder locate the studs and hold the WallMount (#A) on the stud at the desired height. Using
a bubble level to ensure straightness mark the center of the mounting holes as shown with a pencil.
• Use a 5/32” drill bit and drill on the marked locations to a depth of 2.4”
• Secure the Wall Mount (#A) to the wall using Lag Screws (#W-A) and Washers (#W-C). Tighten the
screws until secure.
Wood Stud Mounting Option
Step 1a
• Using a bubble level to ensure straightness hold the Wall Mount (#A) to the desired location on the wall
and mark the center of the mounting holes with a pencil.
• Use a 3/8” drill bit and drill on the marked locations to a depth of 2.6”. Clear any dust and debris from
the holes and insert the Concrete Anchors (#W-B).Note: Do not drill mounting holes into mortar (such as
between bricks or stones) only drill and install into solid stone or concrete surfaces.
• Secure the Wall Mount (#A) to the wall using Lag Screws (#W-A) and Washer (#W-C). Tighten the
screws until secure.
Concrete/Brick Mounting Option
Step 1b


Produktspecifikationer

Varumärke: Mount-It!
Kategori: Platt panelstöd
Modell: MI-396

Behöver du hjälp?

Om du behöver hjälp med Mount-It! MI-396 ställ en fråga nedan och andra användare kommer att svara dig